How to upgrade your psp firmware

The Sony PSP runs on a system software referred to as Firmware. And if you are not a newbie in the world of PSP, then you very well know that when it comes to the PSP, ‘It’s all about the Firmware’. In this guide, we are sharing how you can Update PSP Firmware.

How to Update PSP Firmware?

While we will explain about the details of PSP firmware later in the post, lets first get started with updating it. There are two methods by which you can update.

  • Directly update PSP firmware
  • Custom way to update PSP Firmware

The first way is possible when PSP is connected to the internet over WiFi, while the indirect approach is when it’s connected through the PC.

How to upgrade your psp firmware

Directly update PSP Firmware

  • Go to SETTINGS -> SYSTEM UPDATE and press X.
  • The device will detect the latest PSP Firmware that it can support.
  • Download the latest Firmware Version file.
  • The installation should start once you finish downloading the file.
  • If it doesn’t, go to GAME -> MEMORY STICK on your PSP and run the firmware update yourself.
  • Follow the onscreen instructions, and it will update your PSP.

Custom way to update the PSP firmware

Now, this method is useful for people who prefer to download the Update File using a computer. It is also useful when you want to update to a particular version, but not the latest version.

Many a time, for example, when you are on Version 6.00, and you prefer to update to Version 6.20 or 6.35 instead of the latest 6.60. So follow these steps to custom firmware update your PSP. The only trick is to figure out the previous version from the internet. Make sure you download it from a trusted website if it’s not available on the official website.

  • Once you download the file, rename it to EBOOT.PBP if it does not already have that name.
  • Connect your PSP to the computer and open your PSP Memory Stick.
  • Go to PSP -> GAME and make a folder named UPDATE and paste the EBOOT.PBP file into it.
  • Once done, go to your PSP, and you should be able to find this Update File in GAME -> MEMORY STICK.
  • Run this file by pressing X and follow the onscreen instructions.
  • Your PSP will update to the Firmware of your choice.

Now after you have finished updating your PSP using any of the above methods, on your PSP go to SETTINGS -> SYSTEM SETTINGS -> SYSTEM INFORMATION and check the System Software.

You should be able to see the Firmware Version to which you just updated your device. Once you finish the Update process, you no longer need the Update file. You can delete it from the memory stick.

What is a PSP Firmware?

For people who do not know much about this, Firmware is the system software that runs on your PSP as I have already mentioned. It acts as the operating system of your device and is regularly updated and improved over time by Sony as they find out bugs and problems in their firmware and also when they want to include new features.

People are always trying to find out means to update their PSP and also wondering why they should do it.

The underlying reason is to stay up-to-date with the latest software and get rid of all the bugs and problems that were present in the previous version. And at the same time, it is essential to update your PSP Firmware so that you can play the latest and newly launched games.

We hope, we have explained well on how to update PSP. Let us know if you still have any questions.

We’ll show you 3 different ways to do it

I always have and always will believe that it’s worth installing an upgrade to firmware for any device, whether it be a computer, wireless router, or game console. In this article I am going to walk you through the steps required to upgrade the firmware on a PSP device.

Unfortunately, it’s not as easy as double-clicking an EXE file and watching the magic happen. With a PSP, in order to update the firmware, you have to follow a couple of steps. However, they are fairly simple steps that don’t require much technical know-how.

Note that there are three ways to update the firmware on a PSP: using a computer, via network update, and updating using an UMD. I am going to talk about the first method.

How to upgrade your psp firmware

Update PSP Firmware

Step 1: First, download the latest PSP firmware from the PSP System Software site.

How to upgrade your psp firmware

Step 2: Once you download the update to your computer, you need to copy it to Memory Stick Duo media. You can either plug the Memory Stick Duo card into your PSP and then connect the PSP to your computer, or if you can copy it to the memory stick some other way, that’s fine also.

Step 3: Before you copy the file to the Memory Stick Duo, you first need to create a few folders. On the stick, create a folder called PSP, then create a folder inside that called GAME, and finally create a folder inside GAME called UPDATE.

Note that all of the folder names need to be capitalized or else it will not work.

Step 4: Make sure to copy the firmware update file into the UPDATE folder on the memory stick.

Step 5: Now make sure to fully charge your PSP and plug it into a wall outlet. If you do not fully charge it, the update could fail due to a glitch.

Step 6: Insert the memory stick into the PSP if it’s not already there and then click on Game from the home menu and choose Memory Stick by pressing X. You’ll now see the version of the PSP update about to be installed.

How to upgrade your psp firmware

Step 7: Choose PSP Update Version and you’ll get a screen that has a Start button on it. Press Start to begin the firmware upgrade. DO NOT press a single button on the PSP or even touch it while it is updating.

Step 8: To make sure the update worked, go to Settings from the Home menu, then System Settings, then System Information. You should see the new version number for System Software.

Upgrading your PSP is a good idea because there are a lot more games and software applications that run on the new versions. You can also update your PSP using a wireless Internet connection, but I find this method much easier and safer. Enjoy!

Founder of Online Tech Tips and managing editor. He began blogging in 2007 and quit his job in 2010 to blog full-time. He has over 15 years of industry experience in IT and holds several technical certifications. Read Aseem’s Full Bio

I always have and always will believe that it’s worth installing an upgrade to firmware for any device, whether it be a computer, wireless router, or game console. In this article I am going to walk you through the steps required to upgrade the firmware on a PSP device.

Unfortunately, it’s not as easy as double-clicking an EXE file and watching the magic happen. With a PSP, in order to update the firmware, you have to follow a couple of steps. However, they are fairly simple steps that don’t require much technical know-how.

Note that there are three ways to update the firmware on a PSP: using a computer, via network update, and updating using an UMD. I am going to talk about the first method.

How to upgrade your psp firmware

Update PSP Firmware

Step 1: First, download the latest PSP firmware from the PSP System Software site.

How to upgrade your psp firmware

Step 2: Once you download the update to your computer, you need to copy it to Memory Stick Duo media. You can either plug the Memory Stick Duo card into your PSP and then connect the PSP to your computer, or if you can copy it to the memory stick some other way, that’s fine also.

Step 3: Before you copy the file to the Memory Stick Duo, you first need to create a few folders. On the stick, create a folder called PSP, then create a folder inside that called GAME, and finally create a folder inside GAME called UPDATE.

Note that all of the folder names need to be capitalized or else it will not work.

Step 4: Make sure to copy the firmware update file into the UPDATE folder on the memory stick.

Step 5: Now make sure to fully charge your PSP and plug it into a wall outlet. If you do not fully charge it, the update could fail due to a glitch.

Step 6: Insert the memory stick into the PSP if it’s not already there and then click on Game from the home menu and choose Memory Stick by pressing X. You’ll now see the version of the PSP update about to be installed.

How to upgrade your psp firmware

Step 7: Choose PSP Update Version and you’ll get a screen that has a Start button on it. Press Start to begin the firmware upgrade. DO NOT press a single button on the PSP or even touch it while it is updating.

Step 8: To make sure the update worked, go to Settings from the Home menu, then System Settings, then System Information. You should see the new version number for System Software.

Upgrading your PSP is a good idea because there are a lot more games and software applications that run on the new versions. You can also update your PSP using a wireless Internet connection, but I find this method much easier and safer. Enjoy!

How to upgrade your psp firmware

Although they may have begun to become obsolete compared to the boom of smartphones and tablets, the PSP hand held is still a very popular worldwide. As a result Sony continues to release new updates to keep it updated.

Many novice users may think that firmware updates can be a waste of time. But in reality, these updates allow us access new features or tools that could not be used in the original system.

Unlike many computers on which updates are made automatically, PSP consoles often require us to perform the update manually. A process that can be annoying to many users.

How to upgrade your psp firmware
If you’re one of them, here’s how to update the firmware of the PSP.

WARNING: Before starting the upgrade, you should fully charge the battery and make sure you’re not using homebrew (unofficial program).

1. Wireless Internet connection

Connect your PSP to the Internet and select “Network Update”. Once there you can select your WLAN options, choosing “Scan” and giving the PSP the freedom to find a network automatically.

2. Choose the connection

Select the option to connect and press the X button. The PSP will connect to the internet and tell you if an update is available.

3. Free Space Required

If no updates are available you can still play as many games as you want. But keep in mind to always have at least 21MB of free memory for updates.

4. Download updates

The firmware update starts automatically. The time it takes to download will depend on connection speed. Also remember to keep the PSP firmware turned on so that it could update correctly.

5. PSP Updates

After the download is complete press the X button to start the update. Then restart the console so that everything works fine.

6. Terminate the process

After completing the updates, make sure that the PSP is not disconnected or turned off before completing the installation.

As you can see by following a few simple steps you can update your PSP yourself without any assistance.

How to upgrade your psp firmware

Although they may have begun to become obsolete compared to the boom of smartphones and tablets, the PSP hand held is still a very popular worldwide. As a result Sony continues to release new updates to keep it updated.

Many novice users may think that firmware updates can be a waste of time. But in reality, these updates allow us access new features or tools that could not be used in the original system.

Unlike many computers on which updates are made automatically, PSP consoles often require us to perform the update manually. A process that can be annoying to many users.

How to upgrade your psp firmware
If you’re one of them, here’s how to update the firmware of the PSP.

WARNING: Before starting the upgrade, you should fully charge the battery and make sure you’re not using homebrew (unofficial program).

1. Wireless Internet connection

Connect your PSP to the Internet and select “Network Update”. Once there you can select your WLAN options, choosing “Scan” and giving the PSP the freedom to find a network automatically.

2. Choose the connection

Select the option to connect and press the X button. The PSP will connect to the internet and tell you if an update is available.

3. Free Space Required

If no updates are available you can still play as many games as you want. But keep in mind to always have at least 21MB of free memory for updates.

4. Download updates

The firmware update starts automatically. The time it takes to download will depend on connection speed. Also remember to keep the PSP firmware turned on so that it could update correctly.

5. PSP Updates

After the download is complete press the X button to start the update. Then restart the console so that everything works fine.

6. Terminate the process

After completing the updates, make sure that the PSP is not disconnected or turned off before completing the installation.

As you can see by following a few simple steps you can update your PSP yourself without any assistance.

Back to top

System Update

You can update the system software for the PSP™ system using any of the methods listed below.

How to upgrade your psp firmware

[Update via Internet]

Download the update data directly to the system from the Internet. An Internet connection is required to update the system using this method. For details about connecting the system to the Internet, see (Settings) > [Network Settings] > [Infrastructure Mode] in this guide.

[Update via Storage Media]

Use update data that has been saved on storage media (such as the system storage, UMD™, Memory Stick™ or other media).

Notice

During an update, do not remove the Memory Stick™ media or the AC adaptor, and do not turn off the system. If an update is cancelled before completion, the system software may become damaged and the system may require servicing or exchange.

Update via Internet

Select (Settings) > (System Update).
You must have Memory Stick™ media inserted if you are using a PSP-1000/2000/3000 series system.

Select [Update via Internet].

Select the connection that you want to use.
The system connects to the network using an access point. If you do not have a connection saved, select [New Connection] to create a connection.

Download the update data.
When connected to the network, the system scans for the latest update data. Follow the on-screen instructions to download the update data and to start the update.
If you do not want to update the system immediately after the download, you can do so later by selecting (Settings) > (System Update) > [Update via Storage Media] to install the update data.

Press the button.
The update process begins.

Options menu

How to upgrade your psp firmware

If you press the button with a connection selected, the options menu will be displayed. From the menu, you can edit connection settings or delete the connection.

Connect Connect to an access point.
Edit Change connection settings.
Delete Delete a network connection.
Information View information about a network connection.

Update via Storage Media

To perform an update via storage media, you must first download the update data by selecting [Update via Internet] or by using a PC. Some game discs may also contain update data.

Select (Settings) > (System Update).
You must have Memory Stick™ media inserted if you are using a PSP-1000/2000/3000/E1000 series system.

Select [Update via Storage Media].
The system searches for update data. Follow the on-screen instructions to perform the update.

Back to top

System Update

You can update the system software for the PSP™ system using any of the methods listed below.

How to upgrade your psp firmware

[Update via Internet]

Download the update data directly to the system from the Internet. An Internet connection is required to update the system using this method. For details about connecting the system to the Internet, see (Settings) > [Network Settings] > [Infrastructure Mode] in this guide.

[Update via Storage Media]

Use update data that has been saved on storage media (such as the system storage, UMD™, Memory Stick™ or other media).

Notice

During an update, do not remove the Memory Stick™ media or the AC adaptor, and do not turn off the system. If an update is cancelled before completion, the system software may become damaged and the system may require servicing or exchange.

Update via Internet

Select (Settings) > (System Update).
You must have Memory Stick™ media inserted if you are using a PSP-1000/2000/3000 series system.

Select [Update via Internet].

Select the connection that you want to use.
The system connects to the network using an access point. If you do not have a connection saved, select [New Connection] to create a connection.

Download the update data.
When connected to the network, the system scans for the latest update data. Follow the on-screen instructions to download the update data and to start the update.
If you do not want to update the system immediately after the download, you can do so later by selecting (Settings) > (System Update) > [Update via Storage Media] to install the update data.

Press the button.
The update process begins.

Options menu

How to upgrade your psp firmware

If you press the button with a connection selected, the options menu will be displayed. From the menu, you can edit connection settings or delete the connection.

Connect Connect to an access point.
Edit Change connection settings.
Delete Delete a network connection.
Information View information about a network connection.

Update via Storage Media

To perform an update via storage media, you must first download the update data by selecting [Update via Internet] or by using a PC. Some game discs may also contain update data.

Select (Settings) > (System Update).
You must have Memory Stick™ media inserted if you are using a PSP-1000/2000/3000/E1000 series system.

Select [Update via Storage Media].
The system searches for update data. Follow the on-screen instructions to perform the update.

In my earlier post – ‘How to Update your PSP Firmware’ I mentioned that the Sony PSP runs on system software dubbed–Firmware. Firmware acts as the software or so to say the operating system for your PSP device. Game enthusiasts trying to update their PSP can refer to the post mentioned above. Others, looking for downgrading their PSP are most welcome to read this post. I have highlighted the points to downgrade your PSP to an older Firmware version.

The main reason for downgrading your PSP Firmware is very similar to the reason why we Update it. People downgrade their PSP so that they either have a Permanent Crack on their PSP or because they feel comfortable with a particular Crack version which can only be installed when your PSP device is on a specific Firmware Version. So let us check out how to do it.

How to Downgrade your PSP Firmware

  • Download Chronoswitch Downgrader
  • Copy to the memory stick & prepare for an update
  • Execute the program to downgrade

How to upgrade your psp firmware

It is a method using which you can downgrade PSP Firmware (the one you are currently using) to an older Firmware, supported by your device.

To downgrade your PSP Firmware, you will need a tool called ‘Chronoswitch Downgrader.’ You can easily find this tool on the Internet. Once found, download it. Also, download the EBOOT.PBP file for the Firmware version that you want to install on your PSP. Make sure that you are downgrading your PSP to a Firmware that is supported by your PSP.

Steps to downgrade Firmware of PSP

  • Connect your PSP to the computer.
  • On your PSP Memory Stick, go to PSP -> GAME and paste the Chronoswitch Downgrader folder here.
  • Now in PSP -> GAME, make a new folder named UPDATE and paste the EBOOT.PBP file in it.
  • If you have done everything correctly, you should observe ‘2 FOLDERS’ in the location PSP -> GAME. One will be the Chronoswitch Downgrader, and the other one will be the Update folder.
  • Now disconnect your PSP from the computer.
  • On your PSP, go to GAME -> MEMORY STICK and you should find both the above files here.
  • Remember that you will not be able to run the Update File directly because you are already on a higher version of Firmware.
  • Hence you have to run the ‘Chronoswitch Downgrader’ instead.

How to upgrade your psp firmware

  • Once done, Chronoswitch Downgrader will force your PSP to check and run the Update File even though the Update File has an older firmware.
  • Follow the on-screen instructions, and your device is downgraded to the Firmware Version you wanted.

An important point to be considered here is that Chronoswitch Downgrader might create problems for PSP 3000 devices with model no. 09G. So if you do have a PSP 3000 with model no. 09G, then there is a 50% chance that this method will not work for you. For the rest of the models, there have been no errors or problems reported yet. Hence, I request you to first check the model no. of your PSP before PSP downgrading.