How to make char cloth

How to make char cloth

How to make charcoal is a common survival question. The shaving cloth is a very traditional fire, which, according to some, existed already before the Middle Ages. It is commonly used as an ignition in spark-based methods of starting a fire such as iron rod or flint and steel. The shank will not catch fire, but it will easily turn into slow burning red embers with the help of a spark. This makes it a great way to set a handful of dry grass, pine straw, or leaves on fire when a lighter isn’t available.

How to make char cloth

There are just a few things to keep in mind when making your own char cloth. First, you need to use natural fibers for the final result to work properly. The simplest source of starting material is a handful of 100% cotton patches for cleaning guns. These are precut squares, inexpensive, and large enough to provide a good target size for sparking and an acceptable burn time after ignition.

How to make char cloth

Another key concept is that carbon weave results from a pyrolytic reaction similar to coal. The main difference is that we’re starting with cotton instead of wood. Hence, we need to heat our tissue squares in the absence of oxygen. One of the simplest and cheapest ways to do this is with a piece of aluminum foil. Just fold a large piece of aluminum foil in half and insert about twenty pads inside. Then fold well and roll up the three edges of the foil to get a good seal. Finally, make a small hole about half the size of a pencil eraser in the center of the top sheet.

How to make char cloth

Cooking the tea towel is best done outdoors and the gas grill works perfectly. After turning on the grill, simply put the aluminum “package” for cooking, making sure that the central hole is facing up. Leave the grill lid open. The hole acts like a clock that tells us when our carbonizing material is ready. It won’t take long before smoke starts coming out. This smoke comes from degassing a cotton cloth and tells us that everything is working as expected. As soon as the smoke is gone, carefully remove the foil from the grill and let it cool for a few minutes. All the fabric inside should be dull black and I usually try one piece from each batch to make sure it works as expected. It should burn under the ashes, a bit like a cigar, and glow red when you blow it. The rest of the carbon fabric can be stored in an airtight, dry container or Ziploc bag to be ready when you need it.

How to make char cloth

Wyatt has been writing articles and managing RealisticPreparedness since 2012. Areas of interest include Bushcraft, Fieldcraft, Self Defense, and Urban Survival. He is a strong supporter of the Second Amendment.

How to make char cloth

Build a personal survival kit

by Wyatt Johnson Published January 9, 2017 Last modified August 9, 2019

How to make char cloth

Build a quick and easy storage tube

11 January 2017

by Wyatt Johnson · Published 11 January 2017 · Last modified August 9, 2019

How to make char cloth

Portable survival grill

January 10, 2017

by Wyatt Johnson · Published January 10, 2017 · Last modified August 9, 2019

Realistic Preparation: Disasters and Everyday Survival © 2021. All rights reserved.

Made by – Designed with the Hueman theme

Flint and steel are one of the earliest firing techniques, dating back to the early days of metalworking in Europe and Asia. … Uninterrupted

Author: Tim MacWelch, May 15, 2015.

How to make char cloth

Flint and steel are one of the earliest firing techniques, dating back to the early days of metalworking in Europe and Asia. This method creates a red-hot spark when a piece of high-carbon steel hits a hard, sharp edge of the stone (such as a flint flake). Flint and steel are often confused with iron and magnesium rods, but a true assembly of flint and steel produces tiny steel shavings that ignite by friction against each other. These steel sparks are trapped in a charred material – colloquially known as charred material – which is then transferred to dry wood and blown into the flame. It’s this charred material that is so essential to success with flint-and-steel, and is the topic of this post. Contrary to popular belief, char material doesn’t have to be made from cotton cloth.

The charring of flint and steel can be any blackened plant material that will capture and fuel the spark. As mentioned, it’s part of traditional flint-and-steel fire building, but it’s no one-trick pony. Char can also be easily illuminated with modern tools such as ferrocerrium bars and optics (magnifying glasses and parabolic mirrors). Cotton and linen were popular raw materials for making charred fabrics on the American frontier, but you can also use the more flammable plant fibers, firewood, sticky sticks, some shelf mushrooms, and rotten wood and punk.

To make your char, you’ll need a metal container that is nearly air tight, with just a few small holes made by a punch or nail. Fill the jar with charred material and place it in the center of the fire for 5-6 minutes. Smoke and possibly flames should start to come out of the small holes in the can. After three to five minutes, the smoke should almost stop coming out. At the 5- to 6-minute mark, use a stick to carefully roll the hot container out of the fire and let it sit until it’s cool to the touch. Open the box after it has cooled down. You’ll see that the char material is black, shrunken, and fragile—but not burned to ash. It should catch sparks well. If not, it was a poor material or it may need to be further charred. If it is not yet blackened and brittle, it will surely require further charring. Next time, try a different material or a warmer fire.

Another way to make charred tinder is to ignite a ball of tinder material (tree bark fiber is my favorite), and once it’s engulfed in flames, drop it into a glass jar or metal box and close the lid. A lack of oxygen will put out the flames and embers, leaving a mixture of charcoal and firelighters. This material will last indefinitely and will be ignited by a small spark and even breath. Sure, you need one fire to make more fire later, but that’s part of our heritage: the skill and wisdom to plan our needs in advance.

While we’re on the topic of char, I’d like to dispel one fire-building myth. You can’t just grab some chunks of charcoal from a campfire and use them as char. Coal for fire was created in an oxygen rich environment and does not behave like real coal which must be produced in a low oxygen environment to function properly or not at all.

Introduction: How to make the charcloth

How to make char cloth

How to make char cloth

NOW FLAMING THINGS CAN BE CONSTRUCTION! And later it will help you burn more stuff! And you know that maybe you will save your life. (P. S. this is my first instructable so please by all means give me some feedback!)

Step 1: materials

– any type of metal can with a hole in the top (I used the Altiods can)
-aluminium sheet
-100 percent cotton (I used old ripped jeans but you can use any cotton, including tampons)
-FIRE.

Step 2: canvas

Cut the cloth to roughly the same size as the container (it will shrink a lot) and place them in the container.

Step 3: the fire part!

Put the container with the cloth on the fire and wait for the opening at the top to start emitting flames.

When the flames have stopped and the smoke begins to come out of the hole, take it out and wait for it to cool enough not to burn you.

Then cover with aluminum foil so that nothing can escape.

Step 4: no more fire.

After the containers are completely cool, open them and you should have some fabric scraps.

Step 5: applications

The non-woven fabric is used as an ember to light the flint bundle. It is extremely sensitive to heat, which makes it very easy to turn into embers. Personally, I always keep some in my wallet because unlike matches or lighters, I can take it with me to school (I don’t mean you should start a fire at school, I mean that unlike lighters or matches, if you have them with you won’t put yourself in the trouble, so it’s fine for EDC). It also makes it easier to start a fire with my glasses.

How to make char cloth

How to make char cloth

2 people made this project!

  • How to make char cloth

How to make char cloth

Did you carry out this project? Share with us!

Recommendations

How to make char cloth

How to make char cloth

How to make char cloth

How to make char cloth

Arduino competition

How to make char cloth

Take on the scientific challenge

How to make char cloth

For the challenge of the speed of the birds

How to make char cloth

70 comments

How to make char cloth

I did the instructions on the can and was wondering if I could put a link to it in my teaching case that I am busy teaching you how to use it. please come back to me soon

How to make char cloth

Reply 4 years ago

okay sorry I didn’t call you back before

How to make char cloth

I use a small stove with a backpack for this. Charring happens when the flammable gases that come out of the vent die, so I create a vent on the side of the tin box to make it easier to ignite and see these gases. Try experimenting with shooting and lighting the fire with other natural fibers. A fine fabric shaving cloth is very delicate and is always miserable when you need to turn it on
shock to see that the carbon fabric has become charred dust. As you noticed, denim
fabric works better than thinner cotton t-shirt fabric. charred cotton balls,
jute twine braids and thicker denim seams or shirt collars are even more so
durable and keeps the spark longer. Thicker materials will char a little longer than thinner materials.

The classic Altoids coal box does
a great container for your primitive set of fire materials; just stick the ribbon
vent to prevent water from getting in or put everything in an airtight sandwich bag.

To light the fire, I put a charred center and some very dry, fine wood on a thin, short piece of Home Depot cedar wood to keep it away from the cool and possibly moist soil.

If you don’t have a good lighter or if your firewood is good
wet or a little green (and also depending on whether you are purist or more)
interested in starting a fire rather than using all natural materials), some pre-prepared cotton
Vaseline-soaked balls or small twisted paraffin-soaked dryer cones are great ways
to obtain that first flame to light it more intense and balanced
source of flame and heat. Put a piece of straw in your firelighter kit; then you have a mini bellows that you can blow gently to encourage the spread of flames.

Creating Char-Cloth is a very useful skill when it comes to starting a fire, you can use a spark to start a fire. With a small piece of cloth and the sparkle it will glow red and become very hot.

Hope you like them and be sure to check out my other articles here. Also, if you like Bushcraft or would like to see a little more of what I teach, check out my Capsos_Bushcraft Instagram page.

Many thanks to Capsos for sharing his work with us.

Step 1: CHAR-ART

How to make char cloth

Fascio di esca – "Una grande quantità di materiale infiammabile (foglie di felce essiccate, corteccia di betulla verrucosa o molte altre cose) a forma di nido d’uccello con una rientranza al centro, che prende il telo quando il telo è al centro del fagotto, prendilo tra le mani e soffia lentamente nel fagotto.

THE ALARM WILL BE VERY HOT AND SHOULD BE ON FLAME.

Step 2: SECURITY

How to make char cloth

ALL ACTIONS AND INJURIES CAUSED DURING THE EXECUTION OF THIS PROJECT ARE OURS AND WE WILL NOT BE LIABLE FOR ANY INJURY.

Step 3: WHAT YOU NEED

How to make char cloth

With this you will need the following,

Tin "Tendo a usare una vecchia lattina di tabacco."
Some old fabric or 100% cotton or denim.
Source of heat (fire or wood stove).
A stick.
Knife
A small screwdriver.
Fireproof gloves

Step 4: PREPARATION

Use a knife or screwdriver to make a small hole in the lid of the can you intend to use.

Now find the bright green stick and sharpen the tip until it snaps into the hole and make sure it doesn’t fall out easily as you move the can.

Step 5: FABRIC

Remember not to pack too much material in the jar, otherwise it may not work completely due to its density.

Cut the fabric of your choice to fit the can, making sure it doesn’t contain buttons, zippers or anything else that could cause problems.

Now fill the can about 3/4 of its height without squeezing it.

Now put the lid back on.

Step 6: YOUR FIRE

Now light your hot and hot fire,

Indossare guanti ignifughi e posizionare la bomboletta su fiamme/braci "Nessuna fodera nel coperchio ma tieni a portata di mano"

Step 7: SMOKE JET

After some time on the fire, depending on the amount of material in the jar, a trail of smoke will begin to come out of the opening at the top of the jar.

Step 8: IGNITION OF THE GAS

Watch it when it starts to burn and the smoke can ignite and become a jet flame among other things. Leave it on because it is burning gas.

Step 9: COMPLETED

Once the flame has gone out and gone, leave it for another minute or two.

Add a stick to the hole in the lid (this should be done on or near the fire as soon as possible, as if the air got in, it could just ignite itself)

Now with gloves again, take the can from the heat and put it where it cools (remember to keep this stick until the can cools)

Step 10: COOLING

Now that you are waiting for this tin to cool, you can use the heat to make a cup of tea or a warm home-cooked dinner.

Step 11: ITEM READY

If yours looks almost like this when the lid is removed and it is very easy to tear it off, I would say it looks like you made your first batch of Char-Cloth ….. Congratulations

Step 13: Power on

This is what it should look like after being lit with a spark and gently blown.

I have to admit that when my hunting buddy first talked to me about coal I had no idea what he was talking about, but obviously I acted like me. Let’s make sure that doesn’t happen to you.

So the short answer.

Il panno di carbonizzazione è un pezzo di materiale organico che viene "carbonizzato" fino a quando non è per lo più carbonio concentrato.

The result is a piece of fabric that helps start a fire quickly, especially in harsh and adverse conditions, all without a high temperature spark.

I was so impressed that I decided to do some myself. As a result, I got so angry (pun intended) that I had to share with you all how to do it.

Here’s what you need:

  • Scissors or knife
  • Small metal can (Altoids can work well)
  • 2 × 2 squares in 100% cotton
  • Camping propane or similar stove, grill or barbecue
  • Fist or fist

Cut the natural fabric into squares.

Make sure it’s 100% cotton. Other blends of material can result in melted globs — that won’t do you any good.

It is not necessary to have large squares as the charred cloth only has a one-time cooking session, but even squares that are too small can result in an ineffective product. You don’t have to be exact on the size of the squares. Rough edges or irregular shapes are also good.

Cut out the material to the same size and shape as the tin box in which you will store the charred cloth.

Cotton swabs can work too. Also, I advised you to only make a few pieces of fabric at a time. If you have too many sheets, it will take too long and will not work properly.

Find a metal can.

After the squares are ready, prepare a tin box. Altoids cans work great for this. If you want to make a large amount of charcoal fabric, use a can of paint or a can of oatmeal.

Make a hole in the top of the can.You need a hole in the can so that the box doesn’t explode or cause damage.Don’t die with me now.

Place a few squares in the pan. Note: if you don’t have an Altoids tin or something similar, you can use tin foil. It takes a little longer, but it works anyway.

  • Just wrap the squares in a flat bundle of aluminum foil and place it on the stove. The grill also works great with aluminum foil.

Place the can on a small camp stove or grill. Put the can directly on the stove and wait from 15 minutes to 1 hour. Keeping a low flame helps you have more control over the process. When finished, remove the squares from the heat and let them cool.

The squares should be black in color but still flexible. If the material crumbles when you take it out of the jar, you have burned it for too long. In this case, start over with more squares, but keep the can on the heat shorter.

Note: Using a white cloth can help with the process and give you better results.

So when the material has cooled down enough, put it in the EDC or fire kit and use it next time you go camping, hunting or hiking.

Be sure to test your fabric for charbeforeyour life depends on it!

Let me know if you have any questions, suggestions, or issues with the charcoal cloth in the comments section below.

Introduction: Char-fabric

How to make char cloth

How to make char cloth

How to make char cloth

In this tutorial I will show you how to make a charcoal cloth, charcoal cloth is the product of removing oxygen and hydrogen from the fabric making it pure charcoal which does not burn with a flame, burns like embers and is very easy to catch fire, usually it takes about five sparks to ignite, or sooner if you have a magnifying glass

Things you will need:

100% cotton fabric

can with a hole in the lid

a pair of pliers

Step 1: Find a cloth

most people think you need 100% cotton but that’s not true, any organic fiber will do, yes people make charcoal chunks but i admit 100% cotton is the easiest to use, you can find it in most t-shirts

Step 2: Get a can

Find an airtight jar with a lid (like a paint can), once you have one, make a hole about 2-3mm. wide to be small, but not too small, the opening will serve as an escape route for the gases that will burn in the fire, creating a vacuum inside the can

Step 3: Cut the fabric

cut the cloth to the desired length, make sure it fits the can.

Step 4: Place the cloth

put the cloth in the jar as best you can, don’t pack it too much, because if you do, you will have a hard time pulling the cloth out later

Step 5: pliers

make sure you have something to safely remove the can from the heat

Step 6: Light a fire

when you are ready, go ahead and light the fire, put the can in the center so that it does not overturn

Step 7: inside the fire

once in a fire after a minute or two you will notice some smoke and maybe a flame, don’t worry it means it works and the gases are burning, when you see that there is no more smoke or fire from the can it is ready to take and set aside .

Step 8: Set aside

prepare a place to put the can, it will be very hot, so use the pliers to move it, do not remove the lid immediately because it could break because if the embers are inside after opening the lid, the oxygen comes back and burn the cloth then let it cool for 15 minutes, covered

Step 9: After cooling

when it cools down and you can touch it, you can remove the lid, be careful because the cloth is very delicate, then gently remove the cloth from the inside of the can.

Step 10: When it’s over

after taking it out, take a piece of cloth and light it with a match, if it burns with heat and there is no fire then you are right

this project is dangerous and related to a fire, i am not responsible for anything that may happen, this is for educational purposes only

If you are doing this project, please post a photo and show others how you did it, and feel free to develop this idea. I would love to see your ideas, we can learn from each other and always be safe.

Be the first to share

Did you carry out this project? Share with us!

Recommendations

How to make char cloth

How to make char cloth

How to make char cloth

How to make char cloth

Rainbow Colors Competition

How to make char cloth

Organizers: Student Design Challenge

How to make char cloth

Take on the scientific challenge

How to make char cloth

10 comments

How to make char cloth

Great tutorial. How long do you think you can hold a charcoal cloth?

How to make char cloth

Reply 5 years ago

My oldest piece is about 3 months old and still works great until it gets wet

How to make char cloth

Can it be used in black powder?

How to make char cloth

Reply 5 years ago

Not sure but I don’t know why both the carbon and the carbon weave are pure carbon but you will need them in abundance

How to make char cloth

Coal cloth is the little brother of coal and is used as firewood with flint and steel. Once the embers are lit, it is almost impossible to turn it off. Curled up in a bundle of dry grass and twigs, a gentle puff will ignite the flame.

This post may contain affiliate links, so I’m earning a commission.

Learning how to make a homemade charcoal cloth is quite simple.

Using just a few common household items, you can create a material that ignites easily with a little sparkle.

Char canvas is a great addition to any survival kit.

Put it in a string bag and put it with the ignition of your choice, and you’ll be ready to light the fire when you need it most.

Why is it worth using a charcoal cloth to light the bait?

Many fire lighters will not ignite a single spark of magnesium or flint and steel firewood.

How to make char cloth

Unless you have a very dry wood pack made of very fine materials, you may have trouble starting a fire.

As the charred cloth will ignite with a small spark, you just need to light it and then use it to ignite the flint bundle.

After lighting the bait, you can slowly add more fuel to the fire.

So, in principle, the charred cloth makes it easier to ignite the fire and is more reliable than using just one flint bundle.

What is carbon fabric made of?

Carbon fabric is an organic material that has been heated in an oxygen-free container.

The lack of oxygen allows gases to escape from the material without actually catching fire or catching fire on the material.

This process is known as pyrolysis, which is a type of thermolysis.

Charcoal, a popular barbecue fuel, is produced in the same way.

While you can make carbon fabric from a variety of materials, cotton works best.

Blue jeans, wood and other fibers can be used, but my favorite is an old cotton shirt.

How to make a shaving cloth

To learn how to make a charcoal cloth, the first item you’ll need is some kind of tin container.

The Altoids can works perfectly, but you can also use a soup can or something similar, just make sure it’s clean and you have a way to close it.

To start, take a cotton shirt and cut it into lots of small square pieces.

Dimensions don’t have to be exact. about 2 or 3 square inches will work.

How to make char cloth

For best results, use only about 3-5 cotton squares at a time.

It may take a little longer if you have to make a lot of char material, but it will be better if you don’t overload the can.

How to make char cloth

Then take the can and make a small hole in the top.

I used a roofing nail and it worked very well, but any nail, punch, or small drill bit will work.

Don’t make the hole too big.

You want the opening to be large enough for the gases to escape.

The large opening can allow oxygen to enter the can, which will ignite the cotton and destroy the charred tissue.

How to make char cloth

Now take the cotton squares and place them in the pan.

I throw 4 squares into the sheet.

How to make char cloth

Take the can outside and place it on a camp stove, stove with containers, fire, or any other fire source that provides a small amount of heat.

Since you don’t want to inhale the gases, it’s important to take this step outdoors and it smells bad.

I used a small external burner on our grill which worked great.

How to make char cloth

We recommend that you set your heat source to a minimum.

If you do this over the fire, let the fire go out so that only the coals remain.

If the heat source is too hot, it can ignite the cotton.

After about 2 minutes you should start to see smoke coming out of the can.

If you notice the smoke starting to ignite, you need to turn the heat down.

You are looking for a pleasant, slow and steady flow of smoke.

How to make char cloth

After about 20-30 minutes, the smoke will stop and the cloth is ready.

The total time a fire takes depends on the heat source, the can and the amount of material inside.

This batch was boiled for 20 minutes.

Keep it on the stove until it stops smoking and you will get good results.

For thicker things like blue jeans it will take longer.

When the char cloth is done, let the tin cool completely before you open it up.

This prevents two things.

First, you don’t want to get burned.

Secondly, if oxygen is allowed to enter the hot charcoal fabric, it could ignite, ruining the whole process.

How to make char cloth

Once the jar has cooled, open it and check the finished product!

You will notice that the can has changed color, but you can use it again and again.

How to make char cloth

You should be able to handle a charred cloth without it coming apart, however it is a bit delicate.

How to make char cloth

This photo shows a charred cloth on fire after I lit it with a single blow from the iron-hearth.

To protect the carbon fabric from moisture, store it in a sealed ziplock bag or other waterproof container.

How to make a shaving cloth – How Long Does It Take?

Learning how to make a charcoal cloth is a simple project that will take about 20 minutes if you already have a container set up.

It can only take about 10 minutes to make a thinner material, while a thicker material will take longer.

It will take about 5 minutes longer to set up a new container, but you can reuse it in the future while making an extra charcoal cloth.

While now 20 minutes might seem like a lot of extra time, having carbonizing material in your survival kit can save you hours, especially if you can’t find really dry wood.

How to make a shaving cloth In The Oven

You can make a charred cloth in the oven, but I wouldn’t recommend it due to the amount of smoke that is emitted during the process.

If you have access to an outdoor grill, this works great as all fumes are released outside.

If you try to make carbonizing material indoors, chances are great that you will install your own fire suppression system.

Overall: how to make a chessboard

Learning how to make a charcoal cloth is an easy and fun project you can make at home.

With a few simple materials you can make a great firelighter that you can include in your survival kit to have it ready when you need it.

Wprowadzenie: How to make a shaving cloth

How to make char cloth

How to make char cloth

How to make char cloth

Hello and welcome to the next Educational Capsos from me.

Hope you like them and be sure to check out my other instructions here. Also, if you like Bushcraft or would like to see a little more of what I teach, check out my Capsos_Bushcraft Instagram page. Have a nice day, like and leave a comment below. Thank you

Step 1: CHAR-ART

Making Char-Cloth is a very useful skill when it comes to starting a fire, you can start a fire with a spark! with a little cloth and a sparkle, it will glow red and become very hot.

Put it in the bait

Tinder Bundle – "A large amount of flammable material (dried fern leaves, warty birch bark or many other things) in the shape of a bird’s nest with a recess in the center, which catches the sheet when the sheet is in the center of the bundle, take it in your hands and blow slowly into the bundle.

THE ALARM WILL BE VERY HOT AND SHOULD BE ON FLAME.

Step 2: SECURITY

ALL ACTIONS AND INJURIES CAUSED DURING THE EXECUTION OF THIS PROJECT ARE OURS AND WE WILL NOT BE LIABLE FOR ANY INJURY.

Step 3: WHAT YOU NEED

With this you will need the following,

  • Puszka "Mam tendencję do używania starej puszki na tytoń".
  • Some old fabric or 100% cotton or denim.
  • Source of heat (fire or wood stove).
  • A stick.
  • Knife
  • A small screwdriver.
  • Fireproof gloves

Step 4: PREPARATION

Use a knife or screwdriver to make a small hole in the lid of the can you intend to use.

Now find the bright green stick and sharpen the tip until it snaps into the hole and make sure it doesn’t fall out easily as you move the can.

Step 5: FABRIC

Remember not to pack too much material in the jar, otherwise it may not work completely due to its density.

Cut the fabric of your choice to fit the can, making sure it doesn’t contain buttons, zippers or anything else that could cause problems.

Now fill the can about 3/4 of its height without squeezing it.

Now put the lid back on.

Step 6: YOUR FIRE

Now light your hot and hot fire,

Załóż ognioodporne rękawice i umieść puszkę w płomieniach / żarach "Bez wkładu w pokrywce, ale trzymaj się pod ręką"

Step 7: SMOKE JET

After some time on the fire, depending on the amount of material in the jar, a trail of smoke will begin to come out of the opening at the top of the jar.

Step 8: IGNITION OF THE GAS

Watch it when it starts to burn and the smoke can ignite and become a jet flame among other things. Leave it on because it is burning gas.

Step 9: COMPLETED

Once the flame has gone out and gone, leave it for another minute or two.

Add a stick to the hole in the lid (this should be done on or near the fire as soon as possible, as if the air got in, it could just ignite itself)

Now with gloves again, take the can from the heat and put it where it cools (remember to keep this stick until the can cools)

Step 10: COOLING

Now that you are waiting for this tin to cool, you can use the heat to make a cup of tea or a warm home-cooked dinner.

Step 11: ITEM READY

If yours looks like this when the lid is removed and it’s very easy to tear it apart, I’d say it looks like you’ve made your first batch of Char-Cloth. Congratulations

Step 12: film

We apologize for the movement in which I tried to hold the phone and my iron wand in the same hand.

Step 13: Power on

This is what it should look like after being lit with a spark and gently blown.

Be the first to share

Did you carry out this project? Share with us!

Recommendations

How to make char cloth

How to make char cloth

How to make char cloth

How to make char cloth

A challenge in the box

How to make char cloth

For the challenge of the speed of the birds

How to make char cloth

Furniture competition

How to make char cloth

2 comments

How to make char cloth

Very handy to use. I am so glad you helped me