How to make a party bag

What are you doing:

In this project, learn how to make a small self-closing party bag. These easy-to-make bags are perfect for small party favors like food, candy, soap and jewelry. They feature a tab with a top flap that folds into an opposite top tab to close the case. Choose from four sizes of patterns to print with or without colored dots.

Related crafts:To make larger wrapping paper bags, seeEasy gift bagscraft project.

Here’s what you need:
  • White or colored computer paper
  • Glue or double-sided tape
  • Shears
  • Optional:Craft knife, cutting mat, ruler, hollow pen or bone collector, charms for decorating bags or making labels

This project is classified as EASY to do.

How to make a party bag with a lock?

Read all the steps before starting.

Choose a bag to carry. Download and print the pattern. The medium bag is 3½ inches high, the small bag is 2¾ inches high, and the stubby bag is 2½ inches by 2½ inches. The sides of the bag, front and back extend from the bottom of the bag to the center of this pattern. The split bag is 6 inches tall and has two models with four parts that need to be glued together before assembly.

Advice: Create a more decorative bag with wrapping paper, marbled paper, or oriental paper. Maybe you want move the model! to the decorative paper before proceeding. You can easily make a bag with two colors of paper by cutting out the sides and main part of the bag from different papers. Create adhesive tabs on the side pieces so they can be attached to the base of the bag.

Printable templates

How to make a party bag

How to make a party bag

How to make a party bag

How to make a party bag

How to make a party bag

Templates are Adobe PDF files. Adobe Reader is available for free.

All Aunt Annie designs are designed to be printed on standard letter size paper (8.5 “x 11” or A4). If you are printing from Adobe Reader, you may need to select Automatic rotation and centeringoSelect the paper source from the pdf page formatto ensure the best fit.

Cut out the pattern around the outline.Advice:The folded bag consists of four parts: front, back and two sides.

Advice:Using a straight edge and craft knife will make some of the cutting easier, but be sure to protect the table with a cutting matothick piece of cardboard.Note: be careful. Craft knives are sharp and should not be used by children.

Step 3: glue (pieces only)

Glue the two parts of the front and back straps together – half of the bottom of the bag is on each piece. Glue the sides of the bag to the strap on both sides of the bottom of the bag. Glue it so that the tabs are in the bag.

How to make a party bagStep 4: initial assemblyHow to make a party bag

Printed face down, fold and spread it across the center fold line and diagonal fold lines – marked blue here. Fold forward and spread over all other fold lines – marked in red. To make folding easier, mark the fold lines first.

To include:Use a ruler and the bone folderoempty ballpoint pen to make an indent†”not a cut — on each fold line.

Step 4: fold and pasteHow to make a party bag

Gently arrange the sides, front and back of the bag shape. Make sure the adhesive tabs are on the inside. Glue the tabs to the sides with a good craft glue.

Step 6: Bend the tabsHow to make a party bag

Pinch the sides from bottom to top on the fold lines. You should be able to fold the bag flat.

Step 7: locking the topHow to make a party bag

Open the bag and put whatever you want in it. Bend the locking tab and slide it into the opposite tab.

Step 8: decorate

Finish your bag with a cutoutodecorate the bag any way you like. The cutout attached to the paper clip can be used as decoration and another gift.

Your bag is now complete!
How to make a party bag

How to make a party bag

These plastic-free gift bags are the perfect household bags for the holidays.

You will need:

  • Rope
  • Transparent adhesive tape
  • Shears
  • Quick-drying glue

Instructions

  1. Download, print and cut the template provided.
  2. Place the printed side face down and fold the sides as indicated by the dotted line. Then glue the two edges together as the picture shows.
  3. Then fold the base of the paper, following the dotted guideline.
  4. Open the base and fold it on two sides.
  5. Fold the top and bottom edges along the dotted line.
  6. Attach the flaps to close the bottom of the gift bag.
  7. Then fold the sides of the bag.
  8. Turn the bag over and repeat the folding of the sides of the bag.
  9. Gently open the gift box.
  10. Cut two pieces of string and attach them to the bag with clear tape.

Let’s have a party!

Use the same technique to make Bingo gift bags!

BLUEY ™ and the character logo ™ and © Ludo Studio. Licensed by BBC Studios Distribution Ltd.

This is a commercial website for BBC Studios.

The BBC is a trademark of the British Broadcasting Corporation. Logos © 1996.

This site uses cookies for analytics and personalized content. By continuing to browse this site you agree to this use. Find out more about how we use cookies and how to configure them.

OR REPLACE THE OLD EASY VALVE BAG

If you have been to a college rageroother funky party where a Volcano Vaporizer is present, you already know it quickly becomes a center for conversation. Guests who are unfamiliar with the iconic vaporizer are quickly spun up on the Volcano: How it is the world’s best vaporizer, how it works, etc. – by those who have more knowledge on the subject. The bags are filled and carried around the room, and the energy of the party suddenly builds a little more.

Not only is the Volcano known for being one of the best vaporizers in the world, it is also a great vaporizer for parties and social events. The standard Volcano Easy Valve bag is 2 feet tall and approximately 8 inches wide. This bag will hold 3-5 big hits and is easy to fill, just put it back in the chamber and hit the fan. However if your group is a bit larger and you don’t want to deal with constantly refilling and trying to remember the order of who gets next you may want to go XXXL with your own custom 10’ Volcano Party Bag.

A custom Volcano party bag will provide a solid 20-25 draws and is a much better option for celebrations. With the larger 10’ party bag there isn’t the need to constantly refill and the large bag really does add another social aspect to the atmosphere. It takes teamwork to fill and creates excitement and anticipation in the room as everyone awaits their turn to enjoy a tasty couple.

The best thing about replacing the Easy Valve and Hybrid Volcano bags is that you can easily do it yourself. It doesn’t take much work at hand and by following the steps below you can adjust the size of all your Volcano bags from 1ft to 10ft and everything in between.

What you will need

  • Solid Valve Balloon Bag Roll
  • Bag fastener (a paperclipozip tie)
  • Easy bag with valve / hybrid
  • A small flat screwdriver
  • Pliersocrimping device

Volcano Solid Valve bags are open at each end. Remove the solid material from the valve bag and close one open end of the balloon bag as if preparing it for normal use. We use a small but strong paper clip and press it against the bag, cutting off the excess with pliers. You can opt for a zip tieoeven just tie it off.

Now take your easy valve / hybrid bag and remove the pre-assembled bag with a small screwdriver. To do this, pry the piece of clear plastic inside the orange part upwards. Your bag will be secured with an O-ring which can be easily removed with a screwdriver. Set aside the Easy Valve O-ring, rubber airflow cap, plastic ring, orange piece, and correct mouthpiece. Feel free to save your old easy valve bag for some reclaimoedibles.

While unwrapping the entire 10 feet of solid material from the valve bag, place the black grommet on the end of the bag and attach it to the clear plastic ring. You want to make sure most of the plastic ring is facing up towards the top of the bag when full.

Then take the rubber airflow cap and line it up with the plastic part on a hard surface. Make sure no excess clogs the piece of plastic.

Take your orange piece and push it over the cap and plastic piece until you hear a click. From there, insert the mouthpiece and dress up a purse with scissors and voila. You now have your very own 10’ Volcano Vaporizer party bag ready to go for your next big event.

Making your own Volcano Vaporizer Party Bagojust replacing your Easy Valve / Hybrid bags isn’t all too laborious and doing it a few times you will get it proper. However if you would rather leave it to the pros and don’t want to construct your own bag to get the party started we have pre-made 10 footers ready to ship, so you can get straight to partying.

How to make a party bag

Consumables needed:

  • Digital papers and decorations
  • Lightweight cardstockomedium-weight printer paper
  • 3 × 4 inch plastic zip pouches (for SMALL stencils) – available at craft stores and the WalMart craft department.
  • Sandwich size plastic zip bags (for LARGE models)
  • Double-sided tape (or adhesive of your choice)
  • Gadgets to fill your suitcases!

These fun and easy to make cake toppers with a print are perfect for birthday parties! Your party guests will be delighted to receive a personalized gift bag filled with candy, toys and party goodies! This printable craft is also great for showers, Halloween, socks, and more. This template set is available in layered PNG and PSD formats, making it easy to customize for any occasion! You will find different models of small and large toppers.

1. First, open one ofScrapSimple Craft Template: 2and make a duplicate (CTRL + D), then close the original file.

How to make a party bag

2. Open the selected coordination documents. Draw a sheet of paper on the base and hit it CTRL + G(PC),Cmd + G (MAC) oselect the layer from the menu and scroll down to “create clipping mask.” This will “adhere” or “clip” the paper to the base layer of your topper.

How to make a party bag

3. Now select a different card and drag it to the top of the next layer and cut it as in the previous step. Note that I’ve also added a white line to my top layer to give it a nice frame effect.

How to make a party bag

4. Add decorations and text to the bottom half of the candy bag cover. You will see the blue guide markers and leave the ornaments and text below the horizontal blue line as this will be the front of the printable cover of the gift bag.

If you prefer a 3D look, you can print out the embellishments separately, cut them out and use glue dotsodouble-sided sticky foam to make them pop!

5. When you’re done decorating the overlay, save it as a PNG and also save your layered PSD file for editing if you want to reuse it. Open a new 8.5 x 11 inch blank document and drag the PNG version into the new document. You can put several on one sheet.

How to make a party bag

You can also make different topper designs and put them together on a printable sheet.

How to make a party bag

6. Print onto medium-weight matte photo paperocardstock and cut out.

8. Add candy to your plastic bags, add your printable treat bag topper to the top of your bag and staple at the sidesoattach with double-sided tape

9. Add real buttons and a ribbon to personalize them further.

How to make a party bag

These plastic-free gift bags are the perfect household bags for the holidays.

You will need:

  • Rope
  • Transparent adhesive tape
  • Shears
  • Quick-drying glue

Instructions

  1. Download, print and cut the template provided.
  2. Place the printed side face down and fold the sides as indicated by the dotted line. Then glue the two edges together as the picture shows.
  3. Then fold the base of the paper, following the dotted guideline.
  4. Open the base and fold it on two sides.
  5. Fold the top and bottom edges along the dotted line.
  6. Attach the flaps to close the bottom of the gift bag.
  7. Then fold the sides of the bag.
  8. Turn the bag over and repeat the folding of the sides of the bag.
  9. Gently open the gift box.
  10. Cut two pieces of string and attach them to the bag with clear tape.

Let’s have a party!

Use the same technique to make Bingo gift bags!

BLUEY ™ and the character logo ™ and © Ludo Studio. Licensed by BBC Studios Distribution Ltd.

This is a commercial website for BBC Studios.

The BBC is a trademark of the British Broadcasting Corporation. Logos © 1996.

This site uses cookies for analytics and personalized content. By continuing to browse this site you agree to this use. Find out more about how we use cookies and how to configure them.

Show your creativity!

Boxes and Bags

Show your creativity!

Easy gift bags

Make reusable gift bags

How to make a party bag

What are you doing:

In this project, you’ll see how easy it is to make reusable gift bags out of kraft paper. Thanks to this simple technique, you can sew bags of the right size for a gift. You will simply use a stack of booksoboxes as a form for the bag’s base. Wrap one end of the module like a box and remove the module to reveal your bag!

This is the first in a series of gift wrapping projects that the focus is oncreate your own boxes and bagsin various shapes and sizes.

Related crafts:For steps on how to add a sturdy twine holder to the top of your gift bag, take a lookHalloween TrickoTreat Bagscraft project.

Here’s what you need:
  • Wrapping paper
  • Shears
  • Line
  • Pencil
  • Glueotape
  • A stack of books
  • Optional:Cardboard, ribbon, yarn, die and backing rings

This project is classified as EASY to do.

Before it starts
  • Make room for work.
  • Read all the tips.
  • Collect everything you need to complete the project.
  • Think about the project. Imagine what it will be like and what you will do with it.

How to Make Easy gift bags

Read all the steps before starting.

Take a look at the gift you want to wrap and evaluate the size of the bag you will need. You can do this by drawing a rectangle around the gift on a piece of paper and then measuring the height of the gift. Stack books until the side of the book stack is the size of the rectangle you drewolarger. You may need to make twoomore stacks of books side-by-side if your gift is large.

This stack of books will serve as a mold to make a bag.You can also use a boxoa stack of boxes as a form.

Step 2: Cut the wrapping paperHow to make a party bag

Cut a sheet of wrapping paper to use to make a bag. In one direction, the paper should have the desired height of the bag plus 3/4 of the depth of the bag plus 2 cm more. In other words, the paper size should be the height of the bag plus enough paper to fold at the end of the stack of books plus 1 inch.In the opposite direction, the paper should wrap around the stack of books, with an extra 1/2 inch (1 cm) per card.

Step 3: Fold the top edge

Put the wrapping paper right side down. Fold 2 cm along the top edge, fold it and glue it in place.

Phase 4: books on paper

With the wrapping paper facing down, place the stack of books in the center of the paper near the bottom edge. Make sure the stack is about 3/4 of the way up the stack above the bottom edge.

Step 5: Wrap and glueHow to make a party bag

Wrap the paper around the stack and secure the seam with glueotape.Make sure the top edge meets evenly over the seam.

Be careful not to wrap too tightly, oit will be difficult to remove the stack of books from the bag.

Step 6: Make the base of the bagHow to make a party bag

Create the base of the bag by folding the paper at one end of a stack of books just like wrapping a box. Run your fingers along each edge of the stack to fold the corners of the bag. Take the stack of books out of the bag.

Step 7: fold the wedge (optional)How to make a party bag

To create the folded (folded) sides of the bag, join the sides of the bag and fold it to the center of the side.Do this on both sides of the bag.

You can also fold the bottom of the bag and fold it flat, like a shopping bag. This will allow you to store the bag flat.

Step 8: finishing touches (optional)How to make a party bag

  • Strengthen the bag by reinforcing the bottom with a piece of cardboard cut to size and placed on the bottom of the bag.
  • To add a ribbon to tie the bag, drill the two holes on the top of the bag holding the front and back together. Thread the ribbon through the holes. Strengthen the holes by adding notebook reinforcement rings.Advice:For how to add sturdy handles, seeHalloween TrickoTreat Bagscraft project.

OR REPLACE THE OLD EASY VALVE BAG

If you have been to a college rageroother funky party where a Volcano Vaporizer is present, you already know it quickly becomes a center for conversation. Guests who are unfamiliar with the iconic vaporizer are quickly spun up on the Volcano: How it is the world’s best vaporizer, how it works, etc. – by those who have more knowledge on the subject. The bags are filled and carried around the room, and the energy of the party suddenly builds a little more.

Not only is the Volcano known for being one of the best vaporizers in the world, it is also a great vaporizer for parties and social events. The standard Volcano Easy Valve bag is 2 feet tall and approximately 8 inches wide. This bag will hold 3-5 big hits and is easy to fill, just put it back in the chamber and hit the fan. However if your group is a bit larger and you don’t want to deal with constantly refilling and trying to remember the order of who gets next you may want to go XXXL with your own custom 10’ Volcano Party Bag.

A custom Volcano party bag will provide a solid 20-25 draws and is a much better option for celebrations. With the larger 10’ party bag there isn’t the need to constantly refill and the large bag really does add another social aspect to the atmosphere. It takes teamwork to fill and creates excitement and anticipation in the room as everyone awaits their turn to enjoy a tasty couple.

The best thing about replacing the Easy Valve and Hybrid Volcano bags is that you can easily do it yourself. It doesn’t take much work at hand and by following the steps below you can adjust the size of all your Volcano bags from 1ft to 10ft and everything in between.

What you will need

  • Solid Valve Balloon Bag Roll
  • Bag fastener (a paperclipozip tie)
  • Easy bag with valve / hybrid
  • A small flat screwdriver
  • Pliersocrimping device

Volcano Solid Valve bags are open at each end. Remove the solid material from the valve bag and close one open end of the balloon bag as if preparing it for normal use. We use a small but strong paper clip and press it against the bag, cutting off the excess with pliers. You can opt for a zip tieoeven just tie it off.

Now take your easy valve / hybrid bag and remove the pre-assembled bag with a small screwdriver. To do this, pry the piece of clear plastic inside the orange part upwards. Your bag will be secured with an O-ring which can be easily removed with a screwdriver. Set aside the Easy Valve O-ring, rubber airflow cap, plastic ring, orange piece, and correct mouthpiece. Feel free to save your old easy valve bag for some reclaimoedibles.

While unwrapping the entire 10 feet of solid material from the valve bag, place the black grommet on the end of the bag and attach it to the clear plastic ring. You want to make sure most of the plastic ring is facing up towards the top of the bag when full.

Then take the rubber airflow cap and line it up with the plastic part on a hard surface. Make sure no excess clogs the piece of plastic.

Take your orange piece and push it over the cap and plastic piece until you hear a click. From there, insert the mouthpiece and dress up a purse with scissors and voila. You now have your very own 10’ Volcano Vaporizer party bag ready to go for your next big event.

Making your own Volcano Vaporizer Party Bagojust replacing your Easy Valve / Hybrid bags isn’t all too laborious and doing it a few times you will get it proper. However if you would rather leave it to the pros and don’t want to construct your own bag to get the party started we have pre-made 10 footers ready to ship, so you can get straight to partying.

How to make a party bag

Consumables needed:

  • Digital papers and decorations
  • Lightweight cardstockomedium-weight printer paper
  • 3 × 4 inch plastic zip pouches (for SMALL stencils) – available at craft stores and the WalMart craft department.
  • Sandwich size plastic zip bags (for LARGE models)
  • Double-sided tape (or adhesive of your choice)
  • Gadgets to fill your suitcases!

These fun and easy to make cake toppers with a print are perfect for birthday parties! Your party guests will be delighted to receive a personalized gift bag filled with candy, toys and party goodies! This printable craft is also great for showers, Halloween, socks, and more. This template set is available in layered PNG and PSD formats, making it easy to customize for any occasion! You will find different models of small and large toppers.

1. First, open one ofScrapSimple Craft Template: 2and make a duplicate (CTRL + D), then close the original file.

How to make a party bag

2. Open the selected coordination documents. Draw a sheet of paper on the base and hit it CTRL + G(PC),Cmd + G (MAC) oselect the layer from the menu and scroll down to “create clipping mask.” This will “adhere” or “clip” the paper to the base layer of your topper.

How to make a party bag

3. Now select a different card and drag it to the top of the next layer and cut it as in the previous step. Note that I’ve also added a white line to my top layer to give it a nice frame effect.

How to make a party bag

4. Add decorations and text to the bottom half of the candy bag cover. You will see the blue guide markers and leave the ornaments and text below the horizontal blue line as this will be the front of the printable cover of the gift bag.

If you prefer a 3D look, you can print out the embellishments separately, cut them out and use glue dotsodouble-sided sticky foam to make them pop!

5. When you’re done decorating the overlay, save it as a PNG and also save your layered PSD file for editing if you want to reuse it. Open a new 8.5 x 11 inch blank document and drag the PNG version into the new document. You can put several on one sheet.

How to make a party bag

You can also make different topper designs and put them together on a printable sheet.

How to make a party bag

6. Print onto medium-weight matte photo paperocardstock and cut out.

8. Add candy to your plastic bags, add your printable treat bag topper to the top of your bag and staple at the sidesoattach with double-sided tape

9. Add real buttons and a ribbon to personalize them further.

Published
Categorized as IT