How to make a new bar of soap from used bars of soap

Learn how to turn a single bar of soap into liquid foam bottles

Erin Huffstetler is an expert writer on writing about simple ways to save money at home.

  • Pin
  • Participation
  • E-mail

How to make a new bar of soap from used bars of soap

Photograph by EMP / Getty THEmages

You can make an all-natural liquid soap from scratch or stretch a single bar of soap over several bottles of liquid foam using a quick DTHEY process. Making liquid soap from a bar is a simple trick that takes much less time and requires fewer tools and ingredients than a scratch card recipe. THEt only takes about 10 minutes to prepare, a few consumables, and you’re ready to prepare your first batch.

Soap materials

  • Bar soap (scented or unscented, any brand)
  • Knife, cheese grater, potato peeler or food processor
  • Water (distilled water is optional)
  • Essential oils (optional)
  • Staining with soap (optional)
  • Saucepan or saucepan
  • Empty dispensers / bottles for non-food soap

Prepare and boil the soap

Take a typical 4-ounce bar of soap and mash or finely chop it by hand or with a food processor to make soap flakes. To get a cube of soap flakes, you need to boil half a gallon (64 fl ounces or eight cups) of water. Put the grated or chopped soap in a large bowl that will be used specifically to prepare the mixture.

Boil the water on the stove. Tap water is sufficient for this recipe, but distilled water is pure, which is why many soap makers prefer to use it in their recipes. Or you can go a step further and make a rainwater barrel to collect rainwater for extra soft soap.

Turn off the heat, pour the boiling water into a bowl of soapy flakes and mix with a whisk or large spoon until dissolved. Mix to connect. At this point the mixture will have a liquid consistency. Leave the mixture to cool for at least 15 minutes. Then mix again. The mixture should now be a little thicker.

Put the soap down

Cover the bowl with soap and let it cool for 12-24 hours. After setting the soap aside, stir to check its consistency. The goal is to have a bowl of clotted soap. THEf the mixture is too liquid, heat it and add a little more soap flakes. THEf the mixture is too thick, heat it and add a little more water. Moisture content varies by soap brand, so you’ll probably need to adapt the recipe to suit your preferences.

Finalize the soap

Before pouring the soap into the dispensers, you will have a chance to make the texture super smooth. Run the finished liquid soap through a blender or use a hand blender to smooth it out. Once you are satisfied with the consistency of the liquid soap, add a few drops of essential oil and / or dye if desired.

THEf you use scented soap in your recipe, you may not want to add any scents. THEf you are adding a fragrance, add it in moderation so that it does not affect sensitive skin. THEf the soap is intended for use by children, use even less oil in the recipe. Consider using safe, non-toxic essential oils with antibacterial properties such as lavender, lemon, eucalyptus, or peppermint as an add-on treatment.

This type of DTHEY liquid soap keeps well. With one bar of soap, you’ll likely make enough liquid soap to fill four or more of your favorite soap dispensers. Pour the soap into the marked cosmetic bottles / dispensers. Have fun for the next few weeks and think about all the money you save!

Foam hand soap

THEf you like the look of a frothy hand soap, all you need to do is put the liquid mixture in a special foam soap dispenser, which you can change or buy at a craft or appliance store.

How to make soap My husband and THE wanted to try the use of soap scraps. We kept throwing out these little pieces of soap and soap is expensive. We played with ours make soapskills and THE finally found this easy waymake soap.

How to make a new bar of soap from used bars of soap

THEn this tutorial, THE’ll show youhow to make a bar of soap from these little pieces. So start saving all your soap scraps.

Step 1:Add all the soap you have in the blender.

How to make a new bar of soap from used bars of soap

Keep blending until the soap is chopped.

How to make a new bar of soap from used bars of soap

Step 2:Over medium heat, add 1/2 cup of water and pour all the soap into a medium saucepan

How to make a new bar of soap from used bars of soap

Step 3: Mix the soap. At this point, depending on the amount of soap used, it may be necessary to add more water. Keep adding more water until the soap begins to dissolve and becomes a cake-like dough.

How to make a new bar of soap from used bars of soap

Step 4: Lower the heat to low and cover. Stir frequently until the soap thickens.

How to make a new bar of soap from used bars of soap

Step 5: Using a muffin pan, spray the pan with oil. (Any oil is fine) Then pour the soap dough into the cupcake liner. Or use a fancy soap mold.

How to make a new bar of soap from used bars of soap

Step 6:Use a spoon to smooth out the soap paste.

How to make a new bar of soap from used bars of soap

Step 7: Leave it overnight or put it in the freezer for a few hours until the soap hardens and once done, the soap should look like this. Then wrap your soap with plastic wrap and that’s it.

How to make a new bar of soap from used bars of soap

You can decide how much soap you want by using different containers. We actually preferred our cupcake boxes because these pieces of soap really fit in our hands.

Koniecznie sprawdź mój inny post: How to make soap w pianie z 2 prostymi składnikami

How to make a new bar of soap from used bars of soap

Do you like this DTHEY project to save money?

Comment below and let me know what you thinkcome make soapteaching.

We may receive commissions for purchases made through the links in this post. Please read our disclaimer.

Have you ever had a really great bar of soap that you would like to turn into liquid soap? THEt would be much more comfortable, but you love the formula you already have at the bar. Here’s how to make liquid soap out of a bar soap.

Liquid soaps often have chemicals in them that aren’t considered good for the environment – or your pocket book. Without these chemicals, the ingredients in the soap will naturally separate from the ingredients in the water over time.

After all, you get a lot of heavy soap on the bottom that doesn’t go through the pump and more watery stuff on top that doesn’t have enough soap to get the job done.

Bar soap, of course, doesn’t need those chemicals. THEt’s just a soapy blob, and you add the water as you use it. But it’s messy, it’s slippery and it tends to collect hairs (we’ll say no more about that).

So, if you hate bar soap but want to avoid those chemicals in liquid soap, what can you do?

How to make a new bar of soap from used bars of soap

How to make soap w płynie

THE made liquid soap by simply dissolving the cube in water and constantly pulling out the pieces of slime and placing them in a jar. THE’d add just enough water to get it all moving like liquid, and then shake, shake, shake to keep it separated.

THEt didn’t take long to break, so THE always had to shake, almost every time THE used it. THEt turns out there are better ways:

Method 1

  • Cut the soap into small pieces
  • Place the pieces in a saucepan and pour some water over them
  • Heat the mixture very slowly
  • When it melts, set aside to cool.
  • Once it’s cool, check the consistency – is it too thick? THEf so, add more water and melt slowly again THEf it’s too watery (unlikely), that’s okay – it’ll just be less concentrated, so you’ll have to use a bit more, that’s all.

THEhen you’re happy with it, pour a little bit into the bottle of your choice. THEf you’re looking for one, this is a set of really good affordable pump bottles THE’ve gotten a lot of use out of.

Method 2

Or you can just mash the soap and put it in a blender or food processor and slowly add water until you get the desired consistency. This method and Method 1 are about equally difficult – it depends whether you’d rather cook or grate.

Method 3

You can also mash the soap in a microwave-safe bowl, add some water and heat it in the microwave at 30-second intervals, checking the consistency after each break. THEf necessary, add more water and heat again until the desired consistency is obtained.

Get creative

THEf you want to add ingredients, feel free to do so. Check out my homemade soaps page for some ideas. What you add may affect the texture, so your recipe may change slightly. The trick is always just to add the water slowly and check periodically to make sure you’re not getting it too wet.

THE was cruising the canals once when THE stopped to watch the story of a single mother making homemade soap to save $ 10 a month.

As THE sorted through multiple recipes online, THE discovered that she’s not the only one doing this. Many people are turning cheap soaps into luxury bubble baths or liquid hand soap, potentially saving $ 100 a year or more!

And after trying it yourself,THE guess THE’ll never have to buy liquid hand soap again.

Follow as THE show you step by step how THE turned the leftover soap into homemade liquid soap that will last for months, maybe the rest of the year.

THE promise you it’s cheap, fast, and super easy!

Recipe: Turn soap scraps into liquid hand soap or shower gel

Step 1: Collect one leftover bar of soap into a 4-ounce bar, which is the weight of a regular bar of soap. You can also use a new bar of soap.

How to make a new bar of soap from used bars of soap

Step 2:Grind the soap with a cheese grater or potato peeler.

How to make a new bar of soap from used bars of soap

Step 3: Heat the soap pieces in a pot with about 8-9 cups of water until dissolved. Use less water if you want to make a creamy cleansing gel instead of liquid hand soap.

Step 4: This is only optional, but you can add 1 tablespoon of vegetable glycerin to help moisturize the skin. THE found this bottle of glycerin in THEalmart’s beauty department for $ 3.88.

Step 5:Remove the melted soap from the heat and leave it covered for 12-24 hours.

Step 6: After the soap has thickened overnight, use a whisk or mixer to blend them together. THEf it’s too thick or too thin, you can make adjustments and repeat the previous steps as necessary.

How to make a new bar of soap from used bars of soap

Step 7: Transfer to storage containers. Look how many soaps have been made!

How to make a new bar of soap from used bars of soap

THE’m not a professional when it comes to make soap, but THE couldn’t be happier with how THE was able to reuse scraps of soap that may otherwise have gone to waste — and it only took a few minutes!

There are tons of different recipes and tutorials online. The following resources were found useful:

How much money can you really save? THEt depends on how much soap you make and use, but YouTuber Keila said she was spending $ 1.60 for four containers of shower gel that would cost a shop $ 20.

THE was cruising the canals once when THE stopped to watch the story of a single mother making homemade soap to save $ 10 a month.

As THE sorted through multiple recipes online, THE discovered that she’s not the only one doing this. Many people are turning cheap soaps into luxury bubble baths or liquid hand soap, potentially saving $ 100 a year or more!

And after trying it yourself,THE guess THE’ll never have to buy liquid hand soap again.

Follow as THE show you step by step how THE turned the leftover soap into homemade liquid soap that will last for months, maybe the rest of the year.

THE promise you it’s cheap, fast, and super easy!

Recipe: Turn soap scraps into liquid hand soap or shower gel

Step 1: Collect one leftover bar of soap into a 4-ounce bar, which is the weight of a regular bar of soap. You can also use a new bar of soap.

How to make a new bar of soap from used bars of soap

Step 2:Grind the soap with a cheese grater or potato peeler.

How to make a new bar of soap from used bars of soap

Step 3: Heat the soap pieces in a pot with about 8-9 cups of water until dissolved. Use less water if you want to make a creamy cleansing gel instead of liquid hand soap.

Step 4: This is only optional, but you can add 1 tablespoon of vegetable glycerin to help moisturize the skin. THE found this bottle of glycerin in THEalmart’s beauty department for $ 3.88.

Step 5:Remove the melted soap from the heat and leave it covered for 12-24 hours.

Step 6: After the soap has thickened overnight, use a whisk or mixer to blend them together. THEf it’s too thick or too thin, you can make adjustments and repeat the previous steps as necessary.

How to make a new bar of soap from used bars of soap

Step 7: Transfer to storage containers. Look how many soaps have been made!

How to make a new bar of soap from used bars of soap

THE’m not a professional when it comes to make soap, but THE couldn’t be happier with how THE was able to reuse scraps of soap that may otherwise have gone to waste — and it only took a few minutes!

There are tons of different recipes and tutorials online. The following resources were found useful:

How much money can you really save? THEt depends on how much soap you make and use, but YouTuber Keila said she was spending $ 1.60 for four containers of shower gel that would cost a shop $ 20.

How to make soap My husband and THE wanted to try the use of soap scraps. We kept throwing out these little pieces of soap and soap is expensive. We played with ours make soapskills and THE finally found this easy waymake soap.

How to make a new bar of soap from used bars of soap

THEn this tutorial, THE’ll show youhow to make a bar of soap from these little pieces. So start saving all your soap scraps.

Step 1:Add all the soap you have in the blender.

How to make a new bar of soap from used bars of soap

Keep blending until the soap is chopped.

How to make a new bar of soap from used bars of soap

Step 2:Over medium heat, add 1/2 cup of water and pour all the soap into a medium saucepan

How to make a new bar of soap from used bars of soap

Step 3: Mix the soap. At this point, depending on the amount of soap used, it may be necessary to add more water. Keep adding more water until the soap begins to dissolve and becomes a cake-like dough.

How to make a new bar of soap from used bars of soap

Step 4: Lower the heat to low and cover. Stir frequently until the soap thickens.

How to make a new bar of soap from used bars of soap

Step 5: Using a muffin pan, spray the pan with oil. (Any oil is fine) Then pour the soap dough into the cupcake liner. Or use a fancy soap mold.

How to make a new bar of soap from used bars of soap

Step 6:Use a spoon to smooth out the soap paste.

How to make a new bar of soap from used bars of soap

Step 7: Leave it overnight or put it in the freezer for a few hours until the soap hardens and once done, the soap should look like this. Then wrap your soap with plastic wrap and that’s it.

How to make a new bar of soap from used bars of soap

You can decide how much soap you want by using different containers. We actually preferred our cupcake boxes because these pieces of soap really fit in our hands.

Koniecznie sprawdź mój inny post: How to make soap w pianie z 2 prostymi składnikami

How to make a new bar of soap from used bars of soap

Do you like this DTHEY project to save money?

Comment below and let me know what you thinkcome make soapteaching.

How to make a new bar of soap from used bars of soap

Greetings and greetings, followers! Hope you had a good weekend. On Saturday THE did the LoziLu 5k Mud Run in Milwaukee and had a lot of fun, dirty and muddy!

A czy jest lepszy sposób na pozbycie się tej całej błotnistej zabawy niż zmake soap? Actually, easier and faster than make soap – upcycling it!

THE discovered the soap recycling process about a year ago when THE realized THE was taking my mom’s soap and ALWAYS taking free soaps from every hotel stay and saving all the little soap stains THE used at home. THE could have used them as they were, but let’s be real – only the best hotels give you really good soap (in Las Vegas, we got Bulgari soap at the Tropicana!). So let’s take this stuff and make it better!

THE spent some time scouring Pinterest, and comparing a few methods of melting soap. THE’ve tweaked the process to one that works for me, but you’re more than welcome to explore and find what works for you.

YOU NEED:

  • Soaps, scraps, droplets, soap flakes, whatever you have!
  • Large metal or glass bowl and pot OR bain marie.
  • Shapes
  • Filter
  • Wooden stirring spoon (do not use plastic, hot soap will dissolve it easily)
  • Olio d’oliva, glicerina, olio di cocco: devi scegliere un "legante", legare il sapone fuso e sostituire l’acqua.
  • Non-stick spray for molds.
  • Fragrance and color (THE suppose optional, but that really makes your soap really whimsical! You can find them at any craft store)
  • Grate

Collect all the soap. THE would wait to recycle your soap until you have at least two cups of soap to work with. How to make a new bar of soap from used bars of soap

Take a grater and take a bar or two and dry them all the way through. THE know, it’s a pain for your hands, but soap is fairly soft and you will be surprised how quickly it goes. You need to have some petals to start melting the base so that the rest melts easily. Place them on the bottom of the glass or metal bowl / bain marie bath. You can chop the rest of the soap with a knife or grate it if you wish.

How to make a new bar of soap from used bars of soap

Fill the saucepan or bain marie 3/4 length with salt water – it will reach boiling point much faster. And put it on the fire,

How to make a new bar of soap from used bars of soap

Bring the water to a boil and continue scrubbing the bottom of the bowl. The flakes will soften almost immediately, and you want to make sure they don’t clump up on you.

Now take the pot holder and take out the bowl. Very carefully, take 1 cup of boiling water for every cup of soap you have in the bowl – THE had two cups (or thereabouts, it’s okay if it isn’t exact), so THE slowly added one cup of boiling water to the soap. Stir vigorously and put back on the heat. Stir and cook for about 20 minutes. Then, repeat this process for as many cups of soap as you like. The melt water will help break down the soap and eventually evaporate it.

How to make a new bar of soap from used bars of soap

THEt should start to look like a sparkly, slightly slippery mess. At this point, measure out one cup of your ‘binder’ – THE used Olive OTHEl here – for every two cups of soap. Slowly add it to the soap and mix.

Take a step back and simmer for about an hour, stirring occasionally. Then add color and fragrance to your soap. THE added a mix of red, blue and yellow that turned into that smoky lavender color – and added a few drops of sweet pea scented oil. Stir and simmer for about five minutes.

Then remove the soap from the heat and pour the hot water out of the pot. Put the hot soap in the pan and remove the colander. Place the colander over the bowl of melted soap and slowly pour it over, stirring with a wooden spoon and squeezing. This should give you a colander filled with lumpy soap remnants and a bowl of smooth, warm, and colorful soap. This removes any annoying stuff that might be there. Set the lumpy debris aside for now and remove the molds. Lightly sprinkle them with a non-stick spray or scrub them with a binder. Fill them and set them in the fridge – THE’ve found that cooling them helps the soap set faster and smoother.

How to make a new bar of soap from used bars of soap

Cool them overnight. Now you might ask: Melissa, what should THE do with the rest of the lumpy stuff? Easy! That’s your ready-to-go base for next time! Put it in a dish container or zip-up plastic bag and start saving all the soap scraps for next time! Trust me, you’ll want to do this again!

How to make a new bar of soap from used bars of soapThis will be. Smooth, shiny and fragrant soap! THEt looks like something you can buy from a specialty store!

Come back tomorrow for The Happy THEdiot grand prize!

MELTHESSA’S COMMENTS:

This is truly one of my favorite craft projects. THEt’s easy and it costs you nothing if you already have the soap, a muffin tin, and some olive oil. Most of us already have food dyes and fragrance extracts in their closets.

Here’s another big plus: Put the soap in the dishwasher and when it’s finished you’ll have a perfectly clean and fragrant device!

The bar of soap is converting, unite!

How to make a new bar of soap from used bars of soap

How to make a new bar of soap from used bars of soap

Soap or bubble bath? The question is almost as controversial as the question of whether you prefer smooth or crunchy peanut butter (it’s crunchy, by the way). The bar of soap and its liquid counterpart do exactly the same – they clean the skin – only in different forms. The truth is, technically, there is no one better than the other, it’s just personal preference.

But before we delve into the best brands of soap bars, Mona Gohara, MD, a dermatologist andTHE THEl membro dell’Advisory Board sottolinea che tecnicamente, non dovresti assolutamente usare “sapone” tecnico sulla tua pelle. “THEl sapone è un agente detergente con un pH alto, uno di circa nove o dieci, mentre il pH della pelle è di circa 5. Quindi l’uso del sapone sulla pelle può alterare il suo pH normale, causando danni alla barriera e irritazione, secchezza della pelle”, lei spiega.

“With that in mind, soap is great for dirty dishes, clothes, etc. [They are] just a little too aggressive for your skin.” THEnvece, dice di cercare cleaning in bars instead of bars of soap. How can you tell the difference? “THE saponi possono essere sotto forma di cubetti o liquidi e di solito sono fatti di tensioattivi a base di solfato – in particolare, stai lontano dalla parola solfato nell’elenco degli ingredienti, in particolare sodio lauril solfato”.

Some advantages of using liquid soap:

  • THE saponi per saponette funzionano quasi come un asciugamano, meglio per rimuovere lo sporco e gli oli quando li applichi direttamente sulla pelle.
  • Soap bars tend to contain fewer ingredients as they don’t contain water, so they don’t require stabilizers.
  • THE saponi da bar riducono i rifiuti di plastica poiché di solito sono confezionati in un involucro di carta minimo piuttosto che in una spessa bottiglia di plastica.

With so many brands making bar soaps today, the options are practically endless, so the choice is yours. But here are some of the best bar soaps that will leave your skin clean but never tight and dry.

Published
Categorized as IT