With regular maintenance and careful cleaning, you can keep your laminate floor looking shiny and new.
Laminate floors are so beautiful when first installed, but over time they can start to look a little worse for wear. Of course, unsightly streaks and blemishes need not be permanent. By following these simple guidelines, you can clean laminate floors effectively and restore their original sparkle and luster.
If you’re going to coexist happily with this particular flooring material, then you’ve got to know one thing: Laminate hates water. If you allow the flooring to get overly wet, then the installation may warp as moisture seeps between and under the boards. That said, mopping is often the best way to clean laminate floors. So how the heck do you mop the laminate surface without putting it in jeopardy?
There are two methods:
- Use a flat mop and wring it out often; it should remain damp but never make contact with the floor when dripping wet.
- Working in sections, use a spray bottle to mist the floor, then promptly go over with a dry mop. If the floor still looks wet a minute after you’ve mopped it, that means you’re probably using too much water.
When plain warm water doesn’t cut it, consider using a store-bought commercial cleanser. Take care in making your product selection, however. Some chemicals in common floor cleaners can damage laminate, so it’s prudent to double-check the packaging to be certain you are purchasing something that’s laminate-safe. Also, remember that using twice the recommended amount won’t render the floor twice as clean. Rather, the excess leaves a streaky, cloudy residue that actually makes the floor look dirty.
For a tough stain that neither water nor floor cleaner can budge, try an acetone-based solution, such as nail polish remover. Apply it directly to the stain, in as small a quantity as possible. Once the solution has done its work, wipe it away with a soft, clean cloth (not with a scouring pad or anything else that could leave scratches). Another good thing to know: If you’re trying to remove a hard, stuck-on substance like wax or gum, harden it first with an ice pack, then scrape it away with a plastic putty knife.
The least demanding, most reliable way to clean laminate floors is through light but consistent maintenance. Once a week—or as often as traffic in the room demands—sweep or vacuum the floor to control dust and debris. Given the sensitivity of laminate floors to moisture, wipe up spills swiftly after they occur.
Laminate floors shown in magazines and catalogs always shine brilliantly, don’t they? Well, yours can too! Once you’ve managed to get the floor clean, follow up with a soft cloth (or an old T-shirt) and buff the surface using circular motions to achieve a gleaming polish.
Do you want to improve the look of your laminate flooring and extend its life? Laminate floors have specific requirements when it comes to care because they cannot handle excess moisture. And this makes it important to choose your cleaning agents wisely. Flooring professionals report that you should never polish or wax laminate floors since it will leave behind a dull residue.
Further, moisture can get between the boards and get absorbed by the fiberboard leading to swells. Therefore, using rinse-free formulas together with cleaning cloths or microfiber towels will help in minimizing the amount of liquid applied. As you are going to see, cleaning and maintaining laminate floors is easy. Here are a few tips that will help you clean and prolong the life of your floors.
Like other floor types, the more you clean laminate floors, the more you’ll use them in the long run. When it comes to regular upkeep, laminate floors require a few cleaning products. And some of them include regular household ingredients. In general, cleaning your floors once or twice a week is advised to maintain them. You should also clean them extensively once every month.
For regular cleaning, use a soft brush and a vacuum cleaner, or sweep the floors lightly using a dusting mop. Avoid using brooms with hard bristles as they can destroy the surface of your floors. Remember, debris and dirt settle in the grooves. Therefore, ensure that you vacuum or sweep along these lines.
For students who mind their hygiene while using best assignment writing service uk or those with allergies, investing in mops that have antimicrobial protection will help in reducing healthcare costs in the long run. Plus, they’ll help on maintaining a clean and fresh condition. Simple household ingredients such as baking soda, water, and mild soap are perfect for cleaning laminate floors.
Clean extensively every month
Laminate flooring that is not cleaned regularly will need some extra work. Before you start you embark on a robust cleaning session, you need to start by clearing up dirt that can scrape or scratch the laminate surface during cleaning. Stubborn stains require excess scrubbing to be removed with a laminate cleaner to prevent damage caused by lots of elbow grease.
Read the instructions printed on the label and clean as required. Most commercial laminate cleaners will require you to mix water with the concentrate and dampen a soft sponge or cloth to clean. After you’ve finished, wipe the moisture away with a dry cloth since leaving the material on the surface for too long can damage your floors.
Use vinegar and hot water to prevent streaks
Another great cleaning option is hot water since it doesn’t leave marks it dries. You need to soak and wring out excess water from your mop and then glide it across the floor. If you are out of commercial laminate cleaner, vinegar is a great alternative in a bucket of hot or warm water.
Clean up spills and dirt quickly
One of the best ways to keep your laminate floor free of stains and dirt is by acting quickly when something out of the ordinary happens. Clean crumbs and dirt by vacuuming or sweeping. And quickly wipe spills when they occur. You need to soak liquid spills using a dry cloth. For solids, use a damp or moistened cloth to wipe the surface after picking the large pieces on the floor. Follow this by cleaning with a commercial or household cleaning agent as we’ve discussed in the previous sections.
Treating stains on your floor
Blood: The best way to remove blood from your laminate floor is by using a window cleaner. All you have to do is apply a small amount of cleaner to the spot and wipe it with a damp cloth. The sooner you do this, the easier it will be to clean.
Chewing gum: You can get time to clean your floors by delegating tasks to proofreading services UK . Use a plastic knife to remove chewing gum on your floor. Scrape it using the knife and clean the residue with a soft damp cloth. You can dampen the cloth with mineral spirit to have an easy time. Avoid using a metal knife since it will scratch the floor.
Wine, ink, and soda: You can remove either of the above stains using a soft damp cloth. At times, you’ll need to add a detergent to remove stubborn ink marks. Ensure that you clean the spot again with warm water to remove any residue.
Grease: Use a block of ice to remove grease by applying it on the spot. Using a plastic knife, scrape the frozen grease off your floor. Wipe the residue using a soft damp cloth and a small amount of window cleaner.
Maintenance tips for laminate floors
Sweep regularly: Use a vacuum cleaner or a broom with soft bristles to remove pet hair, dirt, and dust on the floor.
Use mats: Entry mats can help in collecting moisture, oils, and dirt from getting into your house. Invest in mat grippers to prevent them from slipping.
Install window coverings: Window coverings help in reducing the effects of sunlight on your laminate floors.
Groom your dog: If your dog has long nails, hire a professional groomer to trim her nails. This will help in preserving the protective layer of your floor.
Laminate floors look like hardwood floors. However, they are not the same. And you shouldn’t treat them the same way. Laminate floors are delicate. You can clean and maintain them by using the tips that we’ve discussed in this article.
Author Bio: Jessica Chapman, a writing editor and writer at uk dissertations , RushEssay and SuperiorPapers from Chicago. She is into sport and politics, enjoys traveling.
According to Which, the average price range for laminate flooring is between £3 and £49. This covers from the cheaper materials to the more premium products. Laminate flooring allows you to choose from a range of designs that are affordable and easy to install.
But once you’ve got laminate floors, how do you clean them?
Cleaning floors shouldn’t be a challenging task. And when it comes to cleaning laminate flooring, the job couldn’t be simpler, provided you know the dos and don’ts.
If you’d like to learn more about how to clean laminate floors without damaging the material, keep reading as we cover 4 top tips!
Light Clean Regularly
It sounds simple, but laminate floors need to be cleaned regularly. Sweeping with a soft-bristle broom can help remove dirt, dust, and hard objects, such as loose stones. You can also use a vacuum to make your job a little easier but be sure to use the hard floor setting (if you have it).
When cleaning laminate flooring, don’t use anything that could scratch the material!
Deep Clean Occasionally
Don’t be tempted to deep-clean laminate floors too often. Unless necessary, try to limit yourself to once every month or two.
Don’t use a lot of water when cleaning as it can cause the laminate flooring to swell. Even if you’re using a steam mop, you should do so sparingly, and try your best to dry the floor as quickly as you can afterward.
Don’t use any harsh chemicals, especially those designed for wood or tile flooring. You should even avoid oil-based cleaners, wax, and polish. There are cleaners available for each of the different types of flooring, but make sure you follow the instructions carefully.
Remember not to use any abrasive substances or materials when cleaning floors that are laminate, as you’ll scratch the material.
Treat Stains Quickly
When it comes to any type of smooth flooring, including laminate, there are major pros and cons as far as stains are concerned. The quicker you tackle a spill, the less likely it is to stain.
Most spills can be wiped up quickly and easily. You can try using a cloth with some warm water and standard dish soap. If that doesn’t work, treat the spill with a laminate floor-friendly stain remover.
Allowing a stain to sit for any length of time will make it impossible to get out!
Finally, you should take precautions to protect your laminate floors from damage. Your chosen flooring company can offer more precise advice about how best to limit damage, but some examples include:
- Avoid sliding furniture or heavy items across your floor
- Place pads or fabric underneath the legs of chairs and tables
- Don’t use rugs with a rough underside
- Make use of mats at the doors of your house to reduce mud and oils
- If you have pets, keep their claws, talons, or nails clipped
- Avoid wearing shoes with points, such as heels
You can’t keep your floors perfect forever! But by taking some small steps, you can certainly make them last longer.
Got More Questions About Laminate Floors?
Hopefully, you now have all the information you need to take care of your laminate floors. The key is to clean regularly, but gently.
If you need more information on laminate floor installing, maintenance, or repair, please get in touch. To contact us about residential work, click here. And for commercial work, click here.
2 Waterloo Gardens – Milner Square, Barnsbury Street, London, N1 1TY, Tel: 0207 609 1234 :: @2013 theflooringgroup :: All Rights reserved :: Designed by Nisoma-Web ltd.
The year 2020 will go down in history as the time when everything changed. Working remotely is becoming the new norm. Shopping moved almost completely online. And cleaning – we look at that in an entirely new way.
It’s no longer acceptable to run a dust cloth over your personal items and call it a day. What else lurks in the corners of your room? We’ve taken cleaning to a whole new level.
It’s one thing to wonder how to clean a shelf in your living room. But what about the floors? They have to be the dirtiest places in your home, right?
If you have laminate flooring, you might be wondering what to do. You installed laminate for all the right reasons. You wanted a flooring that looked as good as hardwood, but stands up better to everyday living. And the coronavirus has definitely challenged what “everyday living” means.
How do you clean it? Better yet, how do you disinfect laminate flooring to ensure it not only looks good, but is safe for your family to live with?
Taking precautions with your laminate flooring
When you install new floors, you do so mostly for the beauty of the floors. You have a certain style in mind. You are creating aesthetics that will blend with your personal decor.
You might even take a second look at how well your flooring choices will do under pressure. Are they easy to clean? Are they easy to maintain over the years?
There’s a difference between cleaning and disinfecting. We’ve also become manic about ensuring everything is safe, sanitized, and doesn’t harbor germs that can make our families sick.
I was doing a few searches the other day in Google. Did you know people right now are searching things like:
- How do you kill germs on laminate floors?
- Can you use Lysol on laminate floors?
- What cleaners are safe for laminate floors?
Yep, this is front and center of every homeowner’s mind.
So what is the answer?
It starts with paying attention to what the manufacturer suggests.
When the manufacturer created the product currently residing in your home, they did so knowing it could sustain certain types of wear. It depends on what the laminate is made of, what topcoat is put into place, how it’s installed in your home. If you do things according to guidelines, it’ll wear well for the life of the product. If you follow the rules, whatever warranty is in place will ensure you are covered for the entire time frame.
The manufacturer knows best.
Some tips hold true no matter what product you choose:
Less water is better. Laminate might be better than hardwood when it comes to standing up against moisture, but it still isn’t made to have standing water in place. Water can soak in and cause extensive damage. It can peel and separate the layers. And it takes surprisingly less than you would imagine.
Never use bleach. Bleach may be the king of getting rid of germs, but it’s not a friend to laminate flooring. Laminate is porous. That means the bleach will soak in and cause a wide array of problems. It will often take the shiny finish off the floors first, before soaking into the color layer and dulling the look of your laminate. As it penetrates deeper, it can warp and curl your floors.
Avoid “promise” products. There are a lot of floor cleaners on the market today that make an array of promises. “Protected shine,” for example, promises to keep your floors radiant no matter how much your family can dish out. But what it’s really doing is filling in the tiny scratch and scuff markets with a filler product. Over time, this product can build, dull the finish, and create a filmy residue that’s difficult to get clean. It may make your floors look good in the beginning, but it will quickly disappear.
Your first step: Keeping dirt at bay
The key to great looking laminate flooring is to keep it clean and dirt-free. Dirt builds over time. By removing the dirt quickly, it means your flooring will stay cleaner naturally.
That means quick clean up when things happen. That’s why you should keep the proper tools right at hand, to be able to get rid of dirt quickly. Swiffer products make it easy to pick up messes fast. Invest in a small vacuum you can use whenever needed. Dust mops are good at picking up surface dirt and pulling them off of your floors. Use a dust mop daily at a minimum, more if your family is busy.
Always have a mop at hand
Sweeping and dusting are your first line of defense in keeping your flooring clean. But even if you dust daily, you aren’t removing the hidden grime that settles into your floors. And that’s where bacteria can live.
Dusting is your starting point. But from there, mopping provides you with a deeper clean.
Always use a soft mop so you won’t hurt the finish on your laminate floors. Not all mops are the same, so it’s wise to find one that works well with the product you have in place.
Keep a towel handy to dry any wet spots that remain after mopping. Excessive moisture – even small residue – can be enough to damage the finish. That means your floors may be impacted by things like swelling or warping.
And always pay attention to the chemicals in the floor cleaner you are selecting. Chemicals might promise to kill bacteria, but many do more harm than good. Avoid harsh chemicals, and refer to your warranty to ensure you’re using products the manufacturer recommends.
You should never use detergent-based cleaning products, as they will leave behind a sticky residue. And never pour any type of cleaning product directly on your floors. Make sure the mop or rag you use is thoroughly rung out, so it’s damp, and rub gently over the surface, ensuring no moisture is left behind.
Now it’s time to disinfect
Cleaning your floors is half the battle. The key to ensuring your floors are disinfected is to use an EPA-approved cleaning agent.
The CDC has issued guidance on what to use on porous materials. Use these guidelines to find a product that works well for your needs.
As always, before trying anything new, use a small amount of product in an inconspicuous place, to ensure it doesn’t leave a mark. If you’re getting down on the floor, be sure to wear gloves to keep your hands safe from harm, and dispose of them after, or wash them and hang them to dry.
All disinfectants can be harmful or fatal to people and animals, so keep the products away from your kids and pets.
Clean floors can give you peace of mind during these trying times. How have you been disinfecting your laminate flooring?
Make your laminate floors shine with our tips on cleaning, regular upkeep, and stain removal.
Today's laminate flooring is a cost-effective, attractive option with highly realistic finishes and textures. It can mimic the look of any type of wood imaginable, including rare or exotic hardwoods, as well as stone and other flooring styles. Laminate floors are strong and difficult to scratch, and this material doesn't expand and contract like hardwood. However, it is more susceptible to moisture damage than real wood, making it a poor choice for bathrooms and laundry rooms where water might leak. Additionally, harsh products aren't recommended for cleaning laminate floors. When installed in other areas of the house, however, cleaning laminate floors is easy. Practicing regular light maintenance will keep your floors looking shiny and new for years to come.
Laminate floors get their beautiful appearance from a photographic reproduction, which is layered inside protective plastic coatings on a supporting core of wood-based material. Although laminate floors look like hardwood, they cannot be refinished and are difficult to repair. If laminate gets worn down, it will have to be replaced, so it's worth your time and effort to keep your laminate flooring clean and free from damaging grit and moisture. Put mats by exterior doors, runners or area rugs in high-traffic rooms, and floor protectors beneath the feet and corners of heavy furniture. These steps will help prevent your laminate floors from accumulating wear over time.
How to Clean Laminate Floors
First and foremost, always follow the manufacturer's care instructions for your new laminate floor, and don't hesitate to call your manufacturer with questions.
Step 1: Vacuum or sweep floors.
If you inherited laminate floors when you moved in, plan on taking care of them by regularly sweeping, dusting, or vacuuming up loose dirt. Sweep or vacuum in the direction that your floor is laid to catch debris between the interlocking pieces. Wipe up all spills right away, including dry materials that fall.
Step 2: Damp-mop laminate floors.
Light damp mopping will help if simply wiping is not enough, but you should exercise caution. Avoid overly wet mopping, which can result in water seeping behind baseboards. When you do mop, use two buckets of water: one for clean water, and one for dirty water. Using a dirty mop head on your floors is usually the reason why annoying streaks appear afterward. Before you mop, vacuum first instead of sweeping, as vacuuming is much more effective at picking up particles. Just be sure to switch your vacuum setting to a soft brush. Rotating bristles on standard brushes can scratch a laminate floor.
Step 3: Dry floors, if needed.
If there is standing water on the floor after mopping, dry it with a microfiber cloth ($10, Bed Bath & Beyond).
Water is typically all you need to clean your laminate floor. If you must use cleaner, opt for a manufactured-approved solution designed for laminate ($15, Target). For a homemade laminate floor cleaner, use a small amount of vinegar mixed with water. Never use wax, acrylic products, or bleach because they can damage the floor's finish.
Once installed, laminate must be properly cared for to keep it looking as good as day one. Read on for our tips for cleaning your laminate floors.
Share this story
- Share this on Facebook
- Share this on Twitter
Share All sharing options for: How to Clean Laminate Floors
Laminate flooring is a popular feature in many homes. Once considered a basic, economical choice, laminate has become much better looking over the decades, and some options are nearly impossible to distinguish from real hardwood—making it a functional and stylish choice. Laminate flooring is also durable, so it’s great for homes with kids and pets. But once installed, laminate must be properly cared for to keep it looking as good as day one.
Sweeping and Vacuuming
The most important aspect of cleaning your laminate flooring is regular care, and the first step is to consult your manufacturer’s instructions.
Generally, though, weekly sweeping or vacuuming will not only keep your floors from looking dirty, but will reduce the need for harsher, deeper cleans down the line. One part of laminate flooring to be mindful of is its top (or “wear”) layer. Made of a plastic, it guards against dogs, shoes, furniture, and other potential sources of damage. Though very durable, it’s important to take certain precautions to protect this layer when cleaning your floors.
Always use your vacuum on the “hardwood” setting to prevent the beater brush from spinning, and always use the vacuum’s soft brush attachment. Never use steel wool or other abrasive materials on laminate flooring, as doing so will damage that top wear layer.
Laminate floors are not waterproof, and excessive moisture can cause major damage. (Among other issues, too much water can weaken the floor’s adhesive, causing bubbling.)
That said, it’s perfectly safe to mop your floors if you do so with care. It’s best to use a slightly damp, not wet, microfiber laminate mop, but a regular mop wrung out as much as possible works, as does a spray mop. Wipe down the floors with a dry cloth after mopping to remove any excess water; never let liquid pool on your floors. For best results, use a cleaning solution specifically made for laminate floors or a DIY option. (More on this below.)
While some may say it’s okay to occasionally steam clean your laminate floors, most experts agree that it’s a bad idea. Steam cleaning requires high heat and lots of moisture—two things that laminate flooring doesn’t like.
Don’t worry if you spill on your laminate floors, just be sure to wipe up the mess right away. Paper towel, a microfiber wipe, or any other soft, absorbent cloth will work just fine (remember, you don’t want to use anything coarse or abrasive and risk scratching the surface).
For a tough stain, it’s ok to spot clean with a little bit of cleaning solution. Additionally, it’s safe to use acetone (nail polish remover) on laminate flooring, which is a good way to remove oily or colored stains, like ink, lipstick, or marker (this is especially useful for folks with kids who like to draw on everything; acetone should get out even the toughest marks).
Dab a small amount of acetone on the area, then wipe immediately with a damp paper towel or rag. Repeat until the stain is gone.
There are plenty of cleaning solutions made specifically for laminate flooring; you should have no problem finding a variety of choices wherever you buy cleaning supplies. Or you could go the DIY route instead.
A teaspoon of clear, unscented dish soap, or a bit of baby shampoo or ammonia-free glass cleaner, mixed into a gallon of water will do the trick. A solution of one part white vinegar and three parts water works great for spot cleaning and for larger areas, too. Whatever you do, avoid anything with ammonia—it’s harmful to that top wear layer. You should also skip any waxy or oil-based cleaners, which will leave streaks on your floors that are near impossible to get out.
Go back over your floors to rinse away any remaining cleaner to prevent buildup of film or residue.
When you love your laminate wood flooring, you want to keep it looking like new. Laminate floors are made to give the appearance of shiny hardwood. But, scuffing, wear and buildup of dirt, grease or grime can reduce shine and make floors appear dull.
The good news is that laminate flooring is durable and easy to care for. Read on for simple tips on how to clean, maintain and protect your laminate floors to ensure they gleam.
Laminate Floors Steps To Clean
Laminate floors are made to give the appearance of shiny hardwood. But, scuffing, wear and buildup of dirt, grease or grime can reduce shine and make floors appear dull.
The good news is that laminate flooring is durable and easy to care for. For a deep cleaning of your laminate floors, follow these steps:
If some areas of your laminate floors need extra attention, you can use Pine-Sol® Multi-Surface Cleaner straight out of the bottle on stubborn floor stains such as grease. Just pour some on a sponge or old toothbrush and gently scrub the floor stain. Never use steel wool or scouring pads when cleaning laminate floors.
Cleaning hardwood floors varies slightly from cleaning laminate floors. Check out these tips for cleaning hardwood floors.
Tools For Cleaning
Cleaning laminate floors involves just a few steps. But, before you begin, it’s important to find the right cleaning products.
Pine-Sol® Multi-Surface Cleaner is safe for use on laminate floors. Just choose your favorite scent — we like using Original Pine on laminate floors. Pine-Sol® Multi-Surface Cleaner also comes in other scents, like Lemon Fresh ® , Lavender Clean ® , Sparkling Wave ® and Tropical Flowers™. All of them will leave your floors smelling fresh and clean.
Check out the Pine-Sol® family of products for more information on our lineup of cleaners.
Before you begin cleaning your laminate wood floors, it’s recommended that you test the cleaner you plan to use on a small, inconspicuous part of your floor before you begin cleaning the entire space. Just apply some of the cleaner to the area, and wait a few minutes to ensure it won’t harm your laminate floors.
Along with using the best product for your laminate floors, it’s helpful to incorporate proper cleaning techniques. Prepping floors before you start mopping is a very important part of the cleaning process.
Start by sweeping and vacuuming floors to pick up dirt and other debris. Loose particles can scratch laminate floors and cause them to dull, which can be hard to reverse.
Sweeping and vacuuming are also things you can do on a day-to-day basis to keep floors smooth and unblemished.
There’s a reason just about every designer on popular home TV shows ends up installing laminate floors. (We see you, Bobby Berk.) It’s made out of wood composite — a.k.a. materials like sawdust pressed together — but looks just like solid hardwood flooring. Plus, it’s often costs less, installs more easily, and comes with a clear protective layer on top.
But just like any other floor in your house, it still requires regular care. Here’s everything you need to know about maintaining your laminate floors, according to Carolyn Forte, director of the Good Housekeeping Institute Cleaning Lab.
How should you clean laminate flooring?
Regularly run a canister vacuum over the surface to remove dirt and debris from cracks and crevices. The Institute likes the Miele Complete C3 Vacuum, which is also backed by our GH Seal. This machine comes with a Pure Suction Floorhead designed for use on all smooth flooring and it stood up to all the criteria in our tests, including debris pick-up, weight, and ease of use. Of course, if you only have an upright model, you can still use that too. “Turn off the rotating brush to keep the bristles from scratching your floors and scattering dirt,” Forte advises.
About once a month, damp-mop the floor for a thorough deep cleaning. Kitchens and spaces that see a lot of foot traffic might need it more frequently. Grab a mop with a washable, reusable microfiber head, like the ones made by Bona, or one with disposable pads, such as a Swiffer. Spray with a laminate floor cleaner (see below) sparingly, so you don’t oversaturate the floor, and then wipe with the mop.
To prevent damage, do not polish or wax a laminate floor. Also, skip abrasive cleaners, scouring powder, and steel wool. They have the potential to scratch the floor and damage the protective finish.
What is the best cleaner for laminate floors?
Weiman Hardwood Floor Cleaner works well on laminate floors and carries our GH Seal. Black Diamond’s Wood & Laminate Floor Cleaner also scored high in our tests, and the spray bottle makes spot cleaning as easy as a spritz and a wipe, especially on scuff marks. Bona makes a separate cleaner for stone, tile, and laminate floors too. It comes in a spray bottle or a jug you can use to refill spray mops.
Skip adding any extra fragrances or essentials oils to the bottle or bucket. These cleaners will impart a good smell as is, and additional ingredients may damage the protective coating.
Can you use a wet Swiffer on laminate floors?
Yes, you can use a wet Swiffer or Swiffer WetJet on laminate floors. “The wet Swiffer is best for quickly cleaning small spaces,” Forte says. “The WetJet with its battery-operated spray and on-board cleaning formula is better suited for large areas.” Bonus: The disposable pads also mean there are no messy mops to store.
Can you use a steam mop on laminate floors?
“It’s best not to use them,” Forte says. “The flooring manufacturers caution against them and it may even void your warranty.” While the steam mop brands may claim they’re safe, check what the care guidelines are for your floor first. Today’s laminates are more resistant to moisture and spills, but the steam can still cause warping and other damage.